i put everything back in the da box, and it all works. i must conclude that one of the components or more don't like the qs. i need it all, so it doesn't matter what the exact cause of the problem was. the da box is still not visible to the lan ports of my maxpower router, so i guess another router is in order here.
On Jun 25, 10:52 am, Jomac Earthman <[email protected]> wrote: > after rebooting from a unix file system check fsck -fy done in > singleuser mode , which reports volume appears to be ok, it runs fine > for a while, and the aforementioned problems slowly seem to develop over the > course of around 24 hrs > ......this box runs 24/7 hosting 2 websites; could the crons that run in the > middle of the night have > something to do with this?...i'm just fishing for answers to the problem here. > as for hd failure..there are 2 drives installed; one has 3,partitions, each > with a system installed, > as well as drive genius 2 which i use regularly to defrag drives which are > used for digital > audio recording and editing and for video recording and editing as well. the > other drive is a data only drive in 2 partitions. > while both are not new, they have been working well for me in the da box, so > i'm inclined to think the > switch from the da box to the qs box is at the heart of the matter. i'd just > go back, but for a problem with > the ethernet port on the da box....it works fine connecting to the broadband > modem from my isp, but will not show up on lan ports of > maxpower router. router is good, works with other macs, and the qs box works > with the router. da ethernet problem is daunting, as > everything works but the ethernet connection to my router, which is needed > for wireless internet to an imac elsewhere in the building. > any ideas? > thanks > joe mac > ace guitar and vocal studio > > ________________________________ > From: dc <[email protected]> > To: G3-5 List <[email protected]> > Sent: Thursday, June 25, 2009 9:48:33 AM > Subject: Re: problems with QS 2001 > > On Jun 25, 8:47 am, jomac <[email protected]> wrote: > > > i've been experiencing some wierdness with a qs 2001 800mhz that i > > got recently. i have an owc 1.2 gig processor upgrade,(works great in > > the da.) 1.5 gig memory, > > and a flashed nvidia vidio card in it...all of which worked perfectly > > in my DA 466. > > after transferring from the da to the qs machine, it freezes > > occaisionally, or the dock disappears, > > and it becomes very sluggish, taking minutes to change apps or > > restart. > > any suggestions not involving power tools or hammers welcome > > These could be symptoms of a dying hard drive. If you have a second > hard drive you might want to clone your system to it then try booting > from it and seeing if your problems disappear. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
