--- On Wed, 7/22/09, Wallace Adrian D'Alessio <[email protected]> wrote:
>
> Slots clean?
>
> Fully seated card?
>
> Does the B&W have such a thing as a CUDA switch?
> Reset?
>
> Do they boot still with the original CPUs?
No slots, it is a ZIF CPU upgrade with a square matrix of 287 pins (17 x 17 - 2
if I counted correctly) that plug into ZIF socket.
They look clean but after a couple unsuccessful tries I spayed them with
contact cleaner and still no go.
Forgot to mention I reset the B & W by depressing the CUDA switch. When that
did not work I left the PRAM battery out overnight still no chime or boot the
following day.
When I put the original CPU's back with the original jumper blocks both B & W's
boot without issue.
Looks like the Sonnet is dead. Thanks for the reply --glen
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs - with a particular focus on
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
