Good result Ross. I have the Seritek 1S2 and run a WD Raptor off it in OSX.4.11 which runs well. You should list your success on the XLR8 database for PCI cards under the interface type - IDE Serial ATA PCI card and any relevant information. http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso
Cheers, Stewie > Date: Fri, 20 Nov 2009 11:22:55 -0800 > Subject: Re: SATA card for DVD burner in a MDD > From: [email protected] > To: [email protected] > > On Nov 19, 12:49 pm, Ross <[email protected]> wrote: > > On Nov 16, 12:03 pm, Ross <[email protected]> wrote: > > > > > >... I will report back on whether it actually > > > works for ATAPI devices, or not... > > Working fine under OS X 10.4.11! SYBA tech support also says my WD > Raptor should run without reformatting off the SYBA card. So, I'm > going to remove the Seritek 1V4 and run the WD Raptor off the SYBA > card. Having two eSATA ports left over is a bonus. Looks like the base > driver OS X version requirements are minimum, covering/working under > later versions as well, including a new driver for 10.6.1 which is > available for download. > > There is a four internal port version of this card that uses the > SiL3124 chipset as well. Maybe next time... > > All-in-all, a very satisfactory purchase, indeed! > > -- > You received this message because you are a member of G-Group, a group for > those using G3, G4, and G5 desktop Macs - with a particular focus on Power > Macs. > The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette > guide is at http://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to [email protected] > For more options, visit this group at http://groups.google.com/group/g3-5-list _________________________________________________________________ Looking for a date? View photos of singles in your area! http://clk.atdmt.com/NMN/go/150855801/direct/01/ -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list
