Regarding entering these three: reset-nvram (enter) set-defaults (enter) reset-all (enter)
What do you enter them into? I'm using a used DP 533 G4 DA 1.5 MB DRAM that so far is trouble free. Mel --- On Wed, 3/3/10, gifutiger <[email protected]> wrote: From: gifutiger <[email protected]> Subject: Re: Start-up To: "G-Group" <[email protected]> Date: Wednesday, March 3, 2010, 8:47 AM Greetings When your platform boots into open firmware, have you reset the open firmware? You can do the reset by entering reset-nvram (enter) set-defaults (enter) reset-all (enter) the reset-all will cause the platform to reboot. Cheers Harry San Jose, Ca ---------------------------------------------------- On Mar 2, 9:22 am, Norm Rowe <[email protected]> wrote: > Hi my G4 has a problem. When I start up it beeps once then goes to open > firmware. It will not start up from the install disk or either of my 2 > internal hard drives. From opn firmfirm ware I must type "mac-boot" and > it starts right up but only on the disk that needs repair or erase and > install. How do I get past this? Any ideas? Bruce?Kyle? > Norm -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list
