On May 6, 2010, at 11:41 AM, Len Gerstel wrote:
On May 6, 2010, at 1:46 PM, john CARMONNE wrote:
On May 6, 2010, at 10:37 AM, iJohn wrote:
On Thu, May 6, 2010 at 8:50 AM, John Carmonne <[email protected]>
wrote:
I wonder what may be wrong here i have an extenal drive WD 1TB
drive and
I have a Firm Tek card in a G4 MDD Dual 1.25 and a card in a PM
G5 Dual 2.7
I can't get the drive to mount on either machine. It mounts fine
with the USB and
FW 800 ports. Firmware doesn't seem to be an issue. Is there a
possibility of a bad drive?
If the drive were bad it would not be usable with USB and FW.
I would suspect either a bad cable or a bad/loose cable
connection to
the either the drive or the eSATA port.
Are you using an internal SATA cable or eSATA? Did you reboot the
machine after attaching the drive?
-irrational john
I'm using an eSATA cable and I did reboot both machines.
Is it known good?
I just opened the pack for the first time. I've had it for about a
year. Are there different ones?
John Carmonne
Yorba Linda USA
Sent from my TiBook 500
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/g3-5-list
