On May 23, 2010, at 9:34 PM, JOHN CARMONNE wrote:
On May 23, 2010, at 9:28 PM, Kris Tilford wrote:
On May 23, 2010, at 11:09 PM, JOHN CARMONNE wrote:
But the WD external won't work It leaves only the SATA to eSATA
bracket in my mind as the weak link.
IF both Seritek cards have identical firmware?
Also, the installed systems could be marginally different somehow,
hence the idea for booting off each other's system under Target
Disk mode. At least then you'd be 100% certain it isn't somehow a
software issue. Right now, you're assuming that the 10.4 & 10.5
systems on each computer are functionally identical, when they
could be different in miniscule but critical ways.
I'll surely not discount that fact however why does the card run
the 3 Hiachi drives on Tiger and Leopard in the G5 but not the WD?
one thing I haven't done is swap the plugs on the 1V4 card maybe
I'm unlucky to get a munged up card?
The firmware on the PM G5 is 5.1.3 and on the PM G4 it's 5.1.3, I'm
too tired tonight to get back down on the floor and heft those big
kids around. but when my bracket gets here then I'll have all the
cables to check futher, I'm also going to do the TDM on these things
to check everything.
I still have a little problem with the restore feature in disk
utility not working in PPC Leopard on both the G5 and G4.
JOHN CARMONNE
Yorba Linda USA
From TiBook 800
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/g3-5-list
