On 12/5/2010 5:02 AM, Clark Martin wrote:
<snip>
2 Voltage needs to be right.
In some cases it can be higher or lower than spec'ed but only if
you know what you are doing.
Otherwise it should be as spec'ed. Devices don't "draw" voltage,
they get what you give them.
<snip>
IIRC the tolerance of the 5 volt buss on all computer power supplies is
4.75v to 5.25v dc (min-max). Anything above or below those values will
cause deleterious effects to the electronics.
Russell
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/g3-5-list
