Hi! I can't copy a 300 GB disk.
Disks command says that the disk is 127 GB but the parts command see a
partition of 285 GB. Only 127 GB is copied w copydisk command.
g4u version 2.2
Both disks are 300 GB, wd1 (target) is slightly bigger.
-----------------
Disks:
wd0 at atabus0 drive 0: <ST3300831A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 127 GB, 266305 cyl, 16 head, 63 sec, 512 bytes/sect x 268435455 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus0 drive 1: <Maxtor 6L300R0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 279 GB, 581463 cyl, 16 head, 63 sec, 512 bytes/sect x 586114704 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
Parts wd0:
Found swap partition; size 2104452 (1027 MB), offset 63
skipping existing swap partition at slot e.
Found Linux Ext2 partition; size 208845 (101 MB), offset 2104515
skipping existing Linux Ext2 partition at slot f.
Found Linux Ext2 partition; size 583721775 (285020 MB), offset 2313360
skipping existing Linux Ext2 partition at slot a.
6 partitions:
# size offset fstype [fsize bsize cpg/sgs]
a: 583721775 2313360 Linux Ext2 0 0 # (Cyl. 2295 -
581384+)
d: 268435455 0 unused 0 0 # (Cyl. 0 -
266305*)
e: 2104452 63 swap # (Cyl. 0*-
2087*)
f: 208845 2104515 Linux Ext2 0 0 # (Cyl. 2087*-
2294)
Not updating disk label.
------------------
The g4u is working very good on other systems.
Thanks
Lars
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
g4u-help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/g4u-help
