On Tue, 25 Jul 2006, lars wrote: > Hi! I can't copy a 300 GB disk. > Disks command says that the disk is 127 GB but the parts command see a > partition of 285 GB. Only 127 GB is copied w copydisk command. > > g4u version 2.2 > Both disks are 300 GB, wd1 (target) is slightly bigger. > ----------------- > Disks: > wd0 at atabus0 drive 0: <ST3300831A> > wd0: drive supports 16-sector PIO transfers, LBA48 addressing > wd0: 127 GB, 266305 cyl, 16 head, 63 sec, 512 bytes/sect x 268435455 sectors > wd0: 32-bit data port > wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) > wd1 at atabus0 drive 1: <Maxtor 6L300R0> > wd1: drive supports 16-sector PIO transfers, LBA48 addressing > wd1: 279 GB, 581463 cyl, 16 head, 63 sec, 512 bytes/sect x 586114704 sectors > wd1: 32-bit data port > wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) > wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) > wd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) > wd0: mbr partition exceeds disk size > wd0: mbr partition exceeds disk size > wd0: mbr partition exceeds disk size
I think you're confusing wd0 and wd1. Also, size in 'parts' output is in sectors, with 1 sector == 512 bytes. - Hubert ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ g4u-help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/g4u-help
