Hi all, I am trying to get my new Sun Fire X4100M2 backed up to my FTP server, but G4U doesn't seem to see the hard disks.
I'm using version 2.3 and the 'disks' command displays the following: g4u> disks sd0 at atapibus2 drive 0: <AMI, Virtual Floppy, 1.00> disk removable sd0: drive offline sd0(umass1:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 sd0(umass1:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 g4u> parts sd0 get label: Operation not supported by device dmesg lists sd0 as a virtual floppy. The X4100 uses an LSI SCSI controller and I have two 70GB disks in a RAID 1 array. I'm assuming this is driver related. Any ideas how I can get g4u to recognize the SCSI controller? -- Matt Krause [EMAIL PROTECTED] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ g4u-help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/g4u-help
