Hello,
I'm using G4U on some different workstations.
It's working fine on 2 kind of configuration.
On the third, I can't connect to the ftp server.
I tried to assign manually an Ip address, netmask ( yes I look at the
doc ;-))
Here is DMesg :
Re0 at pci4 dev0 function 0 : Realtek 8168B/8111B pcie Gigabit Ethernet
Re0 : interrupting at irq10
Re0 : eeprom autoload timed out
Re0 : Ethernet address 00:18:f3: ...
Re0 : using 256 tx descriptor
Rgephy0 at Re0phy 7 : RTL81695/8110S 1000 Base-T media interface, rev 2
: 10BaseT, 10BaseT-FDX, 100BaseT, 100BaseT-FDX, 1000BaseT,
1000BaseT-FDX,Auto
IFConfig -a :
Re0 : flags = 8843 < up, BROADCAST, RUNNING, Simplex, Multicast > mtu
1500
Capabilities = 3f80<TS04, IP4CSUM-RX, IP4CSUM-TX,
TCP4CSUM-RX, TCP4CSUM-TX, UDP4CSUM-RX, UDP4CSUM-TX
Enable=0
Address:00:18:F3 ...
Media: Ethernet Autoselect (none)
Status : no carrier
Inet : 0.0.0.0 NETMASK 0xFF000000 BROADCAST 255.255.255.255
Any idea to make the network working?
Let me know if you need more information.
Thanks
Cyril
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
g4u-help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/g4u-help
