yeah, maybe the 'safe mode' can help me to resolve someting. But i think maybe i do not describe clearly my problem.Repeat as following: 1, On my Master node , i can see info about my cluser even about every node. Yes, i can't see graphics, So, the 'safe mode' can help me greatly,,thanks a lot~~ 2, I install gemate + webfront in a client with rh9 installed that IS NOT a member of my cluster.And i can see no any info about my cluster, ofcouse no graphics. If i can see some info , i can know , the gmond or gmetad in my cluster trust my client. But now , they don't trust. So, i can't see any info. So, could u give me some other advises? Thanks a lot ~~ Waiting for your answer :)
Bernard Li <[EMAIL PROTECTED]> wrote: You might want to check your PHP setting to see if you have 'safe_mode = On'... please see the following post from Rene yesterday... Cheers, Bernard --- Hi, I had a similar problem so I hope this helps. It had to do with the default install of php to safe_mode = On. This will not allow you to run executables like rrdtool to generate the graphs unless they are in the safe_mode_exec_dir=/path-to-somewhere/safe_mode_exec_dir or something like that. Just set these variables in you php.ini file. Then either copy rrdtool or make a simbolic link to your safe_mode_exec_dir look in your http/logs/error_log file you should see something like sh: /rrdtool: not found sh: /rrdtool: not found sh: /rrdtool: not found Once you set your safe_mode_exec_dir this should go away and the graphs should show up Hope it helps Rene --------------------------------- From: jm w [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 20, 2004 17:30 To: Bernard Li Subject: RE: [Ganglia-general] How to run webfront succesfully outside cluster? I just see the ganglia page without any infomation about my 3-node cluser , without any graphs. On the master node ,i can click every node to check their private info.I can chioce some metric on the top to see the info that's on the bottom of the ganglia page.But ,these info are not shown to me when i do the same thing in the outside client.Just a ganglia page. whether i shuold isntall gmond in the outside client?? Bernard Li <[EMAIL PROTECTED]> wrote: When you direct your browser to http://masternode/ganglia what do you see? Do you see a ganglia page with no graphs (but there are other Ganglia wordings...) or no page at all? Cheers, Bernard --------------------------------- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of jm w Sent: Tuesday, April 20, 2004 3:49 To: [email protected] Subject: [Ganglia-general] How to run webfront succesfully outside cluster? I'v installed gmond on every node of my cluser that is using OSCAR3.0 + Redhat 9.0, and installed rrdtool + gmetad + webfront on the Maser node .They worked well. My Master node have 2 NIC, Eth0 with the IP 192.168.0.254 connect the compute nodes in the cluser, Eth1with 10.0.0.1,connect a client ,which is running Redhat9. And I'v installed rrdtool + gmetad + webfront. The web server workes well. But i can't see any node's information in my mozilla. My Client ip 10.0.0.2. I'v added route. Ping 10.0.0.1 and Ping 10.0.0.2 and Ping 192.168.0.254, they all work well. But i can't ping succusffully 192.168.0.X ,which is the compute node's IP in my OSCAR cluster. I've try to open the IP Forword in my Master node, the webfront still don't display my cluster's information. So, How could i do?? Who can give me some advises? Thanks! 无可奈何花落去， 似曾相识燕归来， 小园香径独徘徊。 --------------------------------- Do You Yahoo!? 惠普TT游戏剧，玩游戏，中大奖！ 无可奈何花落去， 似曾相识燕归来， 小园香径独徘徊。 --------------------------------- Do You Yahoo!? 惠普TT游戏剧，玩游戏，中大奖！ 无可奈何花落去， 似曾相识燕归来， 小园香径独徘徊。 --------------------------------- Do You Yahoo!? 惠普TT游戏剧，玩游戏，中大奖！
