Try the following changes: gmond.conf (Cluster A):
all_trusted on gmond.conf (Cluster B): mcast_port 8650 all_trusted on Restart all daemons. Cheers, Bernard > -----Original Message----- > From: Wenguo WEI [mailto:[EMAIL PROTECTED] > Sent: Tuesday, July 27, 2004 2:32 > To: Bernard Li; [email protected] > Subject: 答复: [Ganglia-general] RE: How to configure gmeta > listening on many logic clusters which have same subnet? > > Dear Prof. Bernard, > Gmetad.conf and gmond.conf (for Cluster A and Cluster > B) are as attachment, please check out it. Thank you! > > With Best Regards > Yours > Wenguo WEI > [EMAIL PROTECTED] > [EMAIL PROTECTED] > > -----邮件原件----- > 发件人: Bernard Li [mailto:[EMAIL PROTECTED] > 发送时间: 2004年7月27日 14:39 > 收件人: Wenguo WEI; Wenguo WEI; [email protected] > 主题: RE: [Ganglia-general] RE: How to configure gmeta > listening on many logic clusters which have same subnet? > > Can you post your gmond.conf and gmetad.conf files? > > I suppose it is possible that your hardware (switches, > network cards) is causing some problems. > > Cheers, > > Bernard > > ________________________________ > > From: Wenguo WEI [mailto:[EMAIL PROTECTED] > Sent: Mon 26/07/2004 5:54 PM > To: Bernard Li; 'Wenguo WEI'; [email protected] > Subject: 答复: [Ganglia-general] RE: How to configure gmeta > listening on many logic clusters which have same subnet? > Dear Prof. Bernard, > No, can't work normally. > Once we change the mcast_port and not change xml_port, > then we can only see ONE cluster (half number nodes are up > and the other are down). And we did those test: > 1. in each node from 202.38.192.101 to 202.38.192.132, > if we only change name "Cluser A"/"Cluster B" in gmond.conf, > then we see two clusters and each have 32 nodes. > 2.After we did step 1, if we change Cluster B xml_port, > then it has same display as step 1. > 3. After we did step 1, if we change Cluster B > mcast_port, then we can only see ONE cluster (half number > nodes are up and the other are down). > > Is it affected by other environment variables or the > version of ganglia? We installed ganglia 2.5.6. > > With Best Regards > Yours > Wenguo WEI > [EMAIL PROTECTED] > [EMAIL PROTECTED] > > > -----邮件原件----- > 发件人: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] 代表 Bernard Li > 发送时间: 2004年7月27日 1:01 > 收件人: Wenguo WEI; [email protected] > 主题: [Ganglia-general] RE: How to configure gmeta listening on > many logic clusters which have same subnet? > > Hi: > > Try this: > > In your gmetad.conf, take out the port numbers: > > data_source "cluster A" 202.38.192.101 202.38.192.102 > data_source "cluster B" 202.38.192.117 202.38.192.118 > > In the gmond.conf(s), modify only the mcast_port but not the xml_port. > > Cheers, > > Bernard > > > -----Original Message----- > > From: Wenguo WEI [mailto:[EMAIL PROTECTED] > > Sent: Sunday, July 25, 2004 19:14 > > To: Bernard Li; [email protected] > > Subject: RE: How to configure gmeta listening on many logic > clusters > > which have same subnet? > > > > > > Dear Prof. Bernard Li, > > Thank you for your help. I have tried it but still have some > > problems, let's give details as following: > > > > Suppose we have 32 nodes which IP are within > 202.38.192.[101-132], > > ganglia web interface is installed at 202.38.192.1, we want > to divide > > it into two clusters: > > "cluster A" is 202.38.192.[101-116], "cluster B" is > > 202.38.192.[117-132]. i.e. there are some rows in gmetad.conf like > > this: > > data_source "cluster A" 202.38.192.101:8649 > > 202.38.192.102:8649 data_source "cluster B" > > 202.38.192.117:8650 202.38.192.118:8650 > > > > We do not change "cluster A" config file gmond.conf, > i.e, "cluster > > A" always be displayed normally, now if we change "cluster B" > > gmond.conf file mcast_port=8650 and xml_port=8650, then we can see > > "cluster A" and "cluster B" > > but both of them contain all 32 nodes; if we only change > "cluster B" > > mcast_port=8650 then "cluster B" will not be displayed, "cluster A" > > reporting there are 16 nodes down and > > 16 nodes up. > > Next we should try what? > > Thank you in advance. > > > > With Best Regards > > Yours > > Wenguo WEI > > [EMAIL PROTECTED] > > [EMAIL PROTECTED] > > > > From: Bernard Li <[EMAIL PROTECTED]> > > RE: How to configure gmeta listening on many logic clusters > which have > > same subnet? > > <http://sourceforge.net/mailarchive/message.php?msg_id=9046878> > > 2004-07-23 11:43 > > Hi: > > > > I believe you should actually be changing the mcast_port, not the > > xml_port. Try doing that and then re-start all your > daemons (gmetad, > > gmond) and you should be able to see them as separate datasources. > > > > BTW, I assume that you have listed them as different > datasources in > > your gmetad.conf as well? > > > > Cheers, > > > > Bernard > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On > Behalf Of > Wenguo WEI > > > Sent: Thursday, July 22, 2004 23:48 > To: > > [EMAIL PROTECTED] > > > Subject: [Ganglia-general] How to configure gmeta > listening > on > > many logic clusters which have same subnet? > > > > > > Dear all, > > > How to configure gmeta listening on many logic clusters > > > which have same subnet? > > > I have config some gmonds to send info using > > > xml_port=8649, some gmonds using 8650, but at the web > > interface, > > we can not see the machine which using 8650, how > > > to config gmetad.conf? > > > > > > Thanks any tips/suggestion/helps in advance. > > > With Best Regards > > > Yours > > > Wenguo WEI > > > [EMAIL PROTECTED] > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > This SF.Net email is sponsored by BEA Weblogic Workshop FREE > > > Java Enterprise J2EE developer tools! > > > Get your free copy of BEA WebLogic Workshop 8.1 today. > > > http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click > > > _______________________________________________ > > > Ganglia-general mailing list > > > [EMAIL PROTECTED] > > > https://lists.sourceforge.net/lists/listinfo/ganglia-general > > > > > > > > > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by BEA Weblogic Workshop FREE > Java Enterprise J2EE developer tools! > Get your free copy of BEA WebLogic Workshop 8.1 today. > http://ads.osdn.com/?ad_idG21&alloc_id040&op�k > _______________________________________________ > Ganglia-general mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ganglia-general > > >
