Dear ,
Thank you for your response. It's same as before.
With Best Regards
Yours
Wenguo WEI
[EMAIL PROTECTED]
[EMAIL PROTECTED]
-----邮件原件-----
发件人: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] 代表 Bernard Li
发送时间: 2004年7月29日 2:29
收件人: Wenguo WEI; [email protected]
主题: RE: [Ganglia-general] RE: How to configure gmeta listening on many
logic clusters which have same subnet?
Try the following changes:
gmond.conf (Cluster A):
all_trusted on
gmond.conf (Cluster B):
mcast_port 8650
all_trusted on
Restart all daemons.
Cheers,
Bernard
> -----Original Message-----
> From: Wenguo WEI [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, July 27, 2004 2:32
> To: Bernard Li; [email protected]
> Subject: 答复: [Ganglia-general] RE: How to configure gmeta
> listening on many logic clusters which have same subnet?
>
> Dear Prof. Bernard,
> Gmetad.conf and gmond.conf (for Cluster A and Cluster
> B) are as attachment, please check out it. Thank you!
>
> With Best Regards
> Yours
> Wenguo WEI
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]
>
> -----邮件原件-----
> 发件人: Bernard Li [mailto:[EMAIL PROTECTED]
> 发送时间: 2004年7月27日 14:39
> 收件人: Wenguo WEI; Wenguo WEI; [email protected]
> 主题: RE: [Ganglia-general] RE: How to configure gmeta
> listening on many logic clusters which have same subnet?
>
> Can you post your gmond.conf and gmetad.conf files?
>
> I suppose it is possible that your hardware (switches,
> network cards) is causing some problems.
>
> Cheers,
>
> Bernard
>
> ________________________________
>
> From: Wenguo WEI [mailto:[EMAIL PROTECTED]
> Sent: Mon 26/07/2004 5:54 PM
> To: Bernard Li; 'Wenguo WEI'; [email protected]
> Subject: 答复: [Ganglia-general] RE: How to configure gmeta
> listening on many logic clusters which have same subnet?
> Dear Prof. Bernard,
> No, can't work normally.
> Once we change the mcast_port and not change xml_port,
> then we can only see ONE cluster (half number nodes are up
> and the other are down). And we did those test:
> 1. in each node from 202.38.192.101 to 202.38.192.132,
> if we only change name "Cluser A"/"Cluster B" in gmond.conf,
> then we see two clusters and each have 32 nodes.
> 2.After we did step 1, if we change Cluster B xml_port,
> then it has same display as step 1.
> 3. After we did step 1, if we change Cluster B
> mcast_port, then we can only see ONE cluster (half number
> nodes are up and the other are down).
>
> Is it affected by other environment variables or the
> version of ganglia? We installed ganglia 2.5.6.
>
> With Best Regards
> Yours
> Wenguo WEI
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]
>
>
> -----邮件原件-----
> 发件人: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] 代表 Bernard Li
> 发送时间: 2004年7月27日 1:01
> 收件人: Wenguo WEI; [email protected]
> 主题: [Ganglia-general] RE: How to configure gmeta listening on
> many logic clusters which have same subnet?
>
> Hi:
>
> Try this:
>
> In your gmetad.conf, take out the port numbers:
>
> data_source "cluster A" 202.38.192.101 202.38.192.102
> data_source "cluster B" 202.38.192.117 202.38.192.118
>
> In the gmond.conf(s), modify only the mcast_port but not the xml_port.
>
> Cheers,
>
> Bernard
>
> > -----Original Message-----
> > From: Wenguo WEI [mailto:[EMAIL PROTECTED]
> > Sent: Sunday, July 25, 2004 19:14
> > To: Bernard Li; [email protected]
> > Subject: RE: How to configure gmeta listening on many logic
> clusters
> > which have same subnet?
> >
> >
> > Dear Prof. Bernard Li,
> > Thank you for your help. I have tried it but still have some
> > problems, let's give details as following:
> >
> > Suppose we have 32 nodes which IP are within
> 202.38.192.[101-132],
> > ganglia web interface is installed at 202.38.192.1, we want
> to divide
> > it into two clusters:
> > "cluster A" is 202.38.192.[101-116], "cluster B" is
> > 202.38.192.[117-132]. i.e. there are some rows in gmetad.conf like
> > this:
> > data_source "cluster A" 202.38.192.101:8649
> > 202.38.192.102:8649 data_source "cluster B"
> > 202.38.192.117:8650 202.38.192.118:8650
> >
> > We do not change "cluster A" config file gmond.conf,
> i.e, "cluster
> > A" always be displayed normally, now if we change "cluster B"
> > gmond.conf file mcast_port=8650 and xml_port=8650, then we can see
> > "cluster A" and "cluster B"
> > but both of them contain all 32 nodes; if we only change
> "cluster B"
> > mcast_port=8650 then "cluster B" will not be displayed, "cluster A"
> > reporting there are 16 nodes down and
> > 16 nodes up.
> > Next we should try what?
> > Thank you in advance.
> >
> > With Best Regards
> > Yours
> > Wenguo WEI
> > [EMAIL PROTECTED]
> > [EMAIL PROTECTED]
> >
> > From: Bernard Li <[EMAIL PROTECTED]>
> > RE: How to configure gmeta listening on many logic clusters
> which have
> > same subnet?
> > <http://sourceforge.net/mailarchive/message.php?msg_id=9046878>
> > 2004-07-23 11:43
> > Hi:
> >
> > I believe you should actually be changing the mcast_port, not the
> > xml_port. Try doing that and then re-start all your
> daemons (gmetad,
> > gmond) and you should be able to see them as separate datasources.
> >
> > BTW, I assume that you have listed them as different
> datasources in
> > your gmetad.conf as well?
> >
> > Cheers,
> >
> > Bernard
> >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED] On > Behalf Of
> Wenguo WEI >
> > Sent: Thursday, July 22, 2004 23:48 > To:
> > [EMAIL PROTECTED]
> > > Subject: [Ganglia-general] How to configure gmeta
> listening > on
> > many logic clusters which have same subnet?
> > >
> > > Dear all,
> > > How to configure gmeta listening on many logic clusters
> > > which have same subnet?
> > > I have config some gmonds to send info using
> > > xml_port=8649, some gmonds using 8650, but at the web >
> interface,
> > we can not see the machine which using 8650, how
> > > to config gmetad.conf?
> > >
> > > Thanks any tips/suggestion/helps in advance.
> > > With Best Regards
> > > Yours
> > > Wenguo WEI
> > > [EMAIL PROTECTED]
> > > [EMAIL PROTECTED]
> > >
> > >
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > This SF.Net email is sponsored by BEA Weblogic Workshop FREE >
> > Java Enterprise J2EE developer tools!
> > > Get your free copy of BEA WebLogic Workshop 8.1 today.
> > > http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
> > > _______________________________________________
> > > Ganglia-general mailing list
> > > [EMAIL PROTECTED]
> > > https://lists.sourceforge.net/lists/listinfo/ganglia-general
> > >
> > >
> >
> >
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by BEA Weblogic Workshop FREE
> Java Enterprise J2EE developer tools!
> Get your free copy of BEA WebLogic Workshop 8.1 today.
> http://ads.osdn.com/?ad_idG21&alloc_id040&op�k
> _______________________________________________
> Ganglia-general mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ganglia-general
>
>
>
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_idG21&alloc_id040&op�k
_______________________________________________
Ganglia-general mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ganglia-general
