Bummer!
Everything was compiling & building OK until it hit a bump on the road:
.............
+ /usr/lib/rpm/brp-lib64-linux
[EMAIL PROTECTED]: if you find problems with this script, drop me a note
/tmp/ganglia-monitor-core-2.5.7-buildroot/usr/lib/libganglia.so.1.1.0:
file format elf64-x86-64
/tmp/ganglia-monitor-core-2.5.7-buildroot/usr/lib/libganglia.so.1.1.0:
should be in */lib64
Bad exit status from /var/tmp/rpm-tmp.25998 (%install)
The system I have is:
Procesor: AMD Opteron 250
Operating System: SuSE Enterprise 8.0 + SP-3
echo of /proc/version:
Linux version 2.4.21-143-smp ([EMAIL PROTECTED])
(gcc version 3.2.2 (SuSE Linux))
Any suggestions?
Jose.
-----Original Message-----
From: Bernard Li [mailto:[EMAIL PROTECTED]
Sent: Friday, January 14, 2005 1:42 PM
To: Nazario Jose
Cc: [email protected]
Subject: RE: [Ganglia-general] Ganglia for AMD Opteron x86_64
Hi Jose:
You can d/l the latest Ganglia from the Ganglia homepage:
http://www.ganglia.info/downloads.php
You should be able to do rpm --rebuild
ganglia-monitor-core-2.5.7-1.src.rpm. This RPM provides BOTH gmetad and
gmond. The other RPMs do not have any architecture dependency.
Please let us know if you were able to get it working on x86_64!
Thanks,
Bernard
> -----Original Message-----
> From: Nazario Jose [mailto:[EMAIL PROTECTED]
> Sent: Friday, January 14, 2005 11:22
> To: Bernard Li
> Cc: [email protected]
> Subject: RE: [Ganglia-general] Ganglia for AMD Opteron x86_64
>
> Thank you Bernard for the information.
> I compiled OK: ganglia-monitor-core-2.5.3.tar but do not have
> the source codes for: gmetad & gmond.
>
> I also found the RPM for x86-64 at www.ROCKSSCLUSTERS.ORG
> website but it requires GLIBC_2.3(64bit) & I have GLIBC_2.2 (32bit)
>
> I need to monitor 100 Opteron CPUS but I guess that I will
> have to wait until I upgrade to SuSE 9.x sometime in the future.
>
> Thank you for your efforts trying to port ganglia to x86-64 & SuSE.
>
> Best regards, jose.
>
> -----Original Message-----
> From: Bernard Li [mailto:[EMAIL PROTECTED]
> Sent: Friday, January 14, 2005 12:43 PM
> To: Nazario Jose; [email protected]
> Subject: RE: [Ganglia-general] Ganglia for AMD Opteron x86_64
>
>
> Hi Jose:
>
> Have you tried rebuilding with the SRPMs that are available
> from the download page?
>
> I am actually in the process of building some x86_64 RPMs for
> Ganglia, however, I only have SuSE 9.0/9.1 so I'm not 100%
> sure whether they will work for you.
>
> Cheers,
>
> Bernard
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of
> > Nazario Jose
> > Sent: Friday, January 14, 2005 6:39
> > To: [email protected]
> > Subject: [Ganglia-general] Ganglia for AMD Opteron x86_64
> >
> > Hello,
> > Is there a ganglia version available for AMD Opteron x86_64 ?
> > I tried to install the i386.rpm but it conflicts with /lib &
> > /lib64 I am running SuSE Enterprise 8.0 with Service-Pack 3.
> > (kernel 2.4.21-143)
> >
> > I tried to download the src files but not all of them are available.
> >
> > thanks for any suggestions.
> > Jose
> >
> > Jose Nazario
> > John Deere Dubuque Works
> > 18600 So. John Deere Rd, Dept-601
> > Dubuque, IA 52001-9746
> > Phone: (563) 589-5735 Fax: (563) 589-5601
> >
> > "The future doesn't tap you on the shoulder.
> > It hits you right between the eyes."
> >
> >
> >
> > -------------------------------------------------------
> > The SF.Net email is sponsored by: Beat the post-holiday blues Get a
> > FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> > It's fun and FREE -- well,
> almost....http://www.thinkgeek.com/sfshirt
> > _______________________________________________
> > Ganglia-general mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/ganglia-general
> >
>
>
>
