Thanks Mark H Sent from my iPhone
On Aug 27, 2011, at 2:12 PM, "Mark E. Ludlow" <[email protected]> wrote: > I’ll see what I can dig up. I did a project without a final baghouse and was > amazed at how much the 1% loss of efficiency really amounted to! (it’s all > super-fines). But getting the first 98-or-99% collected takes a huge load off > the baghouse. A critical part of the cyclone is a long-ish downcomer that > allow the material to accumulate and discharge with out disrupting the vortex > dynamics. Learned by experience! Also, stacked Posiflate valves in lieu of a > rotary airlock. > > > > Best, Mark > > > > From: Henri Naths [mailto:[email protected]] > Sent: Saturday, August 27, 2011 7:05 AM > To: [email protected]; Discussion of biomass pyrolysis and gasification > Subject: Re: [Gasification] Charcoal Reduction Mill > > > > Then, a tall skinny, cyclone > > > Hi mark > > I was wondering if you or some one on the list has the math for the > efficiency ratios for cyclones ie. Tall skinny vrs short fat cfm, volume? > Particulates? > > Thanks > > Henri > Sent from my iPhone > > > On Aug 25, 2011, at 10:14 PM, "Mark E. Ludlow" <[email protected]> wrote: > > Then, a tall skinny, cyclone > > _______________________________________________ > Gasification mailing list > > to Send a Message to the list, use the email address > [email protected] > > to UNSUBSCRIBE or Change your List Settings use the web page > http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org > > for more Gasifiers, News and Information see our web site: > http://gasifiers.bioenergylists.org/
_______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
