Alex,
It looks like the attachment may have been stripped. If you send it to me at [email protected] I’ll re-post it as a pdf. Tom From: Gasification [mailto:[email protected]] On Behalf Of [email protected] Sent: Saturday, February 16, 2013 10:51 AM To: Discussion of biomass pyrolysis and gasification Subject: Re: [Gasification] wood boiler o2 control Tom, There are a couple of slides in the following presentation which show how I cobbled together an O2 control system with their old LM-1. The link on the slide is dead but google can help you find more on the Bosch LSU4 sensor. Got four years out of the first sensor. A ittle drift in the last year but still workable if you can check it against a combustion analyser an adjust your controls accordingly. Alex On Saturday 16/02/2013 at 11:29 am, tom caldwell wrote: Hi, I see on the hearth wood heating forum, that a inonvate motorsports mtx is being used for wood boiler o2 control. Where would I find info on this install? thanks tom caldwell
_______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
