I'll try the link again
http://www.burtsgh.com/dl/Mass_Biochar_2.pdf
On 16/02/2013 2:31 PM, Tom Miles wrote:
Alex,
It looks like the attachment may have been stripped. If you send it to
me at [email protected] <mailto:[email protected]> I'll re-post it
as a pdf.
Tom
*From:*Gasification
[mailto:[email protected]] *On Behalf Of
*[email protected]
*Sent:* Saturday, February 16, 2013 10:51 AM
*To:* Discussion of biomass pyrolysis and gasification
*Subject:* Re: [Gasification] wood boiler o2 control
Tom,
There are a couple of slides in the following presentation which show
how I cobbled together an O2 control system with their old LM-1.
The link on the slide is dead but google can help you find more on the
Bosch LSU4 sensor. Got four years out of the first sensor. A ittle
drift in the last year but still workable if you can check it against
a combustion analyser an adjust your controls accordingly.
Alex
On Saturday 16/02/2013 at 11:29 am, tom caldwell wrote:
Hi, I see on the hearth wood heating forum, that a inonvate
motorsports mtx is being used for wood boiler o2 control. Where would
I find info on this install?
thanks
tom caldwell
_______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
[email protected]
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
for more Gasifiers, News and Information see our web site:
http://gasifiers.bioenergylists.org/
_______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
[email protected]
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
for more Gasifiers, News and Information see our web site:
http://gasifiers.bioenergylists.org/
