Hi Paul and Jeff, I take note of your individual situations (fiddle while Rome burns) (:-) so opened up the workshop to see what I could do to at least sort out some practical input to your needs. Time is my enermy, but you both need to be a little more specific as to the diameters of the sticks you wish to chop in this devise. All the materials are on the bench, so I need some diameters pronto, or this day will be lost. Doug.
On Sun, 29 Dec 2013 17:51:05 -0500 Jeff Davis <[email protected]> wrote: > Hi Paul, > > > Traveling in the winter is the most difficult time of the year for me or > even greeting people here (North West PA). Also, some time is needed to > start any project so I propose we keep our (most) communication on this > list where others can participate if they so desire. > > I travel to Indiana to participate in a few guitar events so maybe one > of those times I could head over your way and or, in the non-winter, you > might be in my neighborhood. > > For the most part it's an easy fab project. The disc is about 1 foot in > dia. An old saw blade might be too thin. Maybe an old sprocket or maybe > I could sub that out or flame cut it from stock. I think mild steel > would be fine to start with. Maybe a field disc but they are not flat. > > Hmmm, the more I think about it, subing it out, might be a bad idea > because you'll want a design that is doable in a 3rd world environment. > > Bottom line - it's a deal. > _______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
