[Default] On Mon, 30 Dec 2013 06:53:17 +1300,Doug <[email protected]> wrote:
> >Hi Jeff and Paul, > >It's been a few years since I assembled this concept guillotine design into a >drawing, and I emphasis concept. It was to show a principle of slicing the >fibres as the force of the blade was applied with as much rotation of the >blade possible. How the dimensions are determined can be proven using a >cardboard mock-up and leaves plenty of room for innovation relating to the >features you mention. We have chippers that use disc blades: http://www.greenmech.co.uk/greenmech-disc-blades/ They are definitely not supposed to rotate in use but easy enough to mount so they do, the diameter is much smaller than your design at 100mm (4") diameter but they may make a simple entry for a 1/3 dimension proof of concept. I have several but the postage may be prohibitive or I can ask a machine shop here to assemble something given a few more dimensions. AJH _______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
