GF, most use catalysts which are easily fouled (that's why NG or propane is a preferred fuel.)
Mark From: Gasification [mailto:[email protected]] On Behalf Of Jeff Davis Sent: Saturday, January 04, 2014 5:59 PM To: Discussion of biomass pyrolysis and gasification Subject: Re: [Gasification] Fwd: RE: Whole log pyrolysis for char production was Re: W... GF, Here's a bit of an example: <http://www.naturescomfortllc.com/gt-series-downdraft-wood-furnace/> <http://www.naturescomfortllc.com/gt-series-downdraft-wood-furnace/> Jeff On 01/04/2014 08:13 PM, [email protected] <mailto:[email protected]> wrote: Using radiant heat from refractory (ceremics) There is something about the performance of the ceramic panels which burn gas for the production of radiant heat. They run at about 1000F I believe these panels would be capable of cleaning the gas leaving the production zone of a down daft gasifier.
_______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
