I am trying to understand and get my outbound filters to work with time groups. As a start I have tried to limit the time that my youngest daughter can be on the internet. I am using GnatBox light 3.2.2 and set up a time group called JESS TIME and have set the times from 07:00 to 21:00 everyday. I have set up an Address Objects called JESS_IP and set the IP for her laptop as 192.168.148.18 and the IP for her PC as 192.168.148.23. I have set up an Outbound Filter to: Interface PRO, Protocol ALL, Type Accept, Time based JESS TIME, Priority
5 - Notice, Action Log Default, Source JESS_IP, Destination ANY_IP. I have logged onto my GnatBox via the GBadmin at 9:30 pm and checked the reports etc. and found that one of her IP's is connected to outside IP's. I have gone to her room and confirmed that she is "surfing". If I look in the Active Filters list I see that her filter shows up with a red star beside marked as an inactive time based filter. I would have thought that it should be active and not letting her "out" when it is past 9:00 pm. I am wondering if I have misconfigured something and it is letting her on past her time. Her IP shows up in the Active ARP Table and the Active Connections etc. I assume that Outbound Filters are "looked" at in the order that they are in the list. Should her filter be at the top of the list, or does it really matter when I have other time based filters in the outbound, but they have specific IP's for them and none of them are her IP's? -- Randy Bell mailto:[EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
