Jim,

I checked my setup and it seems to be identical  I have entered it below.
The problem I have is that I cannot get it to dial out.  If I attempt to
ping any address on the internet, rather than dialing out I just get
destination host unreachable.  I have tried pinging from a workstation and
directly from the gnatbox console.  It seems like I need some sort of static
route pointing to the PPP interface so it knows where to send everything,
but with a dynamic connection I don't know what that should be.  What does
your config report say in the routing section?

dan

My setup:

BASIC CONFIGURATION
  DNS
    External name server: 207.172.3.10
    Internal name server: 0.0.0.0
                  Domain: erols.net

  FEATURES

  NETWORK INFORMATION
    LOGICAL INTERFACES
     Name                 Type        IP Address       Netmask          NIC

     -------------------  ---------   ---------------  ---------------
-----
     EXTERNAL             EXTERNAL    0.0.0.0                           PPP
     PROTECTED            PROTECTED   192.168.0.1      255.255.255.0    ep0

    NETWORK INTERFACE CARDS
     NIC    MAC Address        MTU    State  Options
     -----  -----------------  -----  -----  -------
     ed1    00:80:29:ef:e7:54  1500   down   MANUAL
     ep0    00:10:4b:68:8d:6c  1500   up   
     PPP                       1500   down   MANUAL

    Default route (gateway): PPP
                   Hostname: gate

  PPP
    Connection type: On-demand
               Port: COM2
          User name: dholoski
           Password: ******
                     Default            Negotiated
      Local address: 0.0.0.0            0.0.0.0
     Remote address: 207.172.3.8        0.0.0.0
             Parity: none
              Speed: 57600
        Use cts/rts: yes
            Retries: 3
    Retry wait time: 10 seconds
            Timeout: 100 seconds
       Phone number: 4108489414
     Abort keywords: BUSY NO\sCARRIER NO\sDIALTONE
          Dial chat: TIMEOUT 5 "" ATE1V1Q0 OK-AT-OK \dATDT${NUM} TIMEOUT 60
                     CONNECT
         Login chat: TIMEOUT 5 gin:-\r-gin: ${USERNAME} word: ${PASSWORD}
  Address and field: enable  accept
Line quality report: disable deny
        Predictor 1: enable  accept
     Protocol field: enable  accept
       Van Jacobson: enable  accept
     Authentication: none
              Debug: none


-----Original Message-----
From: Jim Burgett
To: [EMAIL PROTECTED]
Sent: 02/22/2000 10:22 PM
Subject: Re: Does anyone use PPP?

Send postings to: [EMAIL PROTECTED]
Access the list archives at:
http://www.gnatbox.com/gb-users/
----------------------------------
Dan;

I have no suggestions, but here is my set up. Maybe it will help.

Jim


BASIC CONFIGURATION
  DNS
    Server: 207.172.3.10
    Domain: erols.net

  NETWORK INFORMATION
    LOGICAL INTERFACES
     Type        IpAddress        Netmask          PhysicalName
     ---------   ---------------  ---------------  ------------
     EXTERNAL    0.0.0.0          na               PPP
     PROTECTED   192.168.1.240    255.255.255.0    fxp0
     PSN         0.0.0.0          255.255.255.0

    Default route (gateway): PPP
                   Hostname: GNAT-Box

  PPP
    Connection type: On-demand
               Port: 1
          User name: jburgett
           Password: *********
                     Default            Negotiated
      Local address: 0.0.0.0
     Remote address: 207.172.3.8      <--- Address of DNS server - this
gets
replaced during negotiation, but I don't know if you need a real address
on
the ISP's net?
             Parity: none
              Speed: 115200
        Use cts/rts: yes
            Retries: 3
    Retry wait time: 10 seconds
            Timeout: 600 seconds
       Phone number: 301-974-8111
     Abort keywords: BUSY NO\sCARRIER NO\sDIALTONE
          Dial chat: TIMEOUT 5 "" ATE1V1Q0 OK-AT-OK \dATDT${NUM} TIMEOUT
60
                     CONNECT
         Login chat: TIMEOUT 5 gin:-\r-gin: ${USERNAME} word:
${PASSWORD}
  Address and field: enable  accept
Line quality report: disable deny
        Predictor 1: enable  accept
     Protocol field: enable  accept
       Van Jacobson: enable  accept
     Authentication: none
              Debug: none



----------------------------------------------
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe gb-users your_email_address
in the body of the message

Reply via email to