I need help with the DCHO set up with GnatBox Lite 3.0.3.  I've been running
for about 3 months and the only problem I have is that GB won't release an IP
and get a new one with the way I have it set up.  The only problem until today
was that I would have to re-start GB about every month so it would go look for
a new address.  Today, however the cable company (Media One Road Runner)
deprovisioned my modem because GB was holding on to the IP address and causing
a conflict with another user.  I had to call them tonight and luckily they
re-provisioned it wothout making me do something I don't want to - get rid of
GB and buy home networking from them.  So I would really appreciate any help,
because if this happens again, I'm afraid they won't be so nice.

My set up is shown below taken directly from a cut and paste via the browser
interface.  Can someone tell me why this doesn't do DCHP automatically? 
Thanks very much for any help.

Bruce

GNAT Box Software Configuration Summary

--------------------------------------------------------------------------------GNAT
Box Light Version: 3.0.3                     Mon Aug 07 21:06:54
2000--------------------------------------------------------------------------------
BASIC CONFIGURATION
  DNS
    disabled

  FEATURES
    XXXXXX-XXXXXX-XXXXXX-XXXXXX - GNAT Box Light 3.0 - Registered

  NETWORK INFORMATION
    LOGICAL INTERFACES
     Name                 Type        IP Address       Netmask          NIC  
     -------------------  ---------   ---------------  ---------------  -----
     EXTERNAL             EXTERNAL    24.xxx.xxx.xxx   255.255.248.0    ed2
DHCP
     PROTECTED            PROTECTED   192.168.xxx.xxx  255.255.255.0    ep0

    NETWORK INTERFACE CARDS
     NIC    MAC Address        MTU    State  Options
     -----  -----------------  -----  -----  -------
     ed2    xx:xx:xx:xx:xx:xx  1500   up     MANUAL
     ep0    yy:yy:yy:yy:yy:yy  1500   up   
     PPP                       1500   down   MANUAL

    Default route (gateway): DHCP
                   Hostname: GNAT-Box

  PREFERENCES
    CONTACT INFORMATION
              Name: 
           Company: 
     Email Address: 
      Phone number: 
     Serial number: XXXXXXXX
     Support email: [EMAIL PROTECTED]

    KEYBOARD LAYOUT
     United States ISO-8859-1

    SCREEN SAVER
     Timeout: 600 seconds

  REMOTE LOGGING
    Logging System Messages to Server: 192.168.XXX.XXX.

    Filter facility: local1
       NAT facility: local0
       WWW facility: local2
      Open priority: notice
     Close priority: notice
       WWW priority: notice

AUTHORIZATION
  ADMINISTRATION ACCOUNTS
    Index  User             Permissions
    -----  ---------------  -------------------------
    1      xx               admin console www remote

  EMAIL PROXY
    disabled

  REMOTE ADMINISTRATION
    WWW  Server: enabled
        Updates: enabled
           Port: 80

    RMC  Server: enabled
        Updates: enabled
           Port: 77

  URL BLOCKING
    disabled

  MOBILE CODE BLOCKING
           JAVA blocking: disabled
    JAVA script blocking: disabled
        ActiveX blocking: disabled

  VPNs

ROUTING
  RIP
    disabled

  STATIC ROUTES
    Index  IP Address      Netmask           Gateway        
    -----  --------------- ---------------   ---------------

OBJECTS
  ADDRESSES
    1      ANY_IP - DEFAULT: Matches all IP addresses.
              Index  Beginning        Ending         
              -----  ---------------  ---------------
              1      0.0.0.0          255.255.255.255


FILTERS
  OUTBOUND
     1 #DEFAULT TRADITIONAL URL PROXY: allow access to DNS.
       DISABLED - Accept "PROTECTED" UDP 
          from "ANY_IP"
            to "ANY_IP" 53 

     2 #DEFAULT NO TRADITIONAL URL PROXY: Allow protected network access to
anywhere.
       Accept "PROTECTED" ALL 
          from "ANY_IP"
            to "ANY_IP"

  REMOTE ACCESS
     1 #DEFAULT: Allow protected network access to WWW remote admin server.
       Accept "PROTECTED" TCP 
          from 192.168.0.0/255.255.255.0
            to 192.168.0.1/255.255.255.255 80 

     2 #DEFAULT: Allow protected network access to RMC remote admin server.
       DISABLED - Accept "PROTECTED" TCP 
          from 192.168.0.0/255.255.255.0
            to 192.168.0.1/255.255.255.255 77 

     3 #DEFAULT TRADITIONAL URL PROXY: Allow connections to URL proxy.
       DISABLED - Accept "PROTECTED" TCP 
          from "ANY_IP"
            to 0.0.0.0/0.0.0.0 2784 

     4 #DEFAULT EMAIL PROXY: Allow connections to email proxy.
       DISABLED - Accept "EXTERNAL" TCP 
          from "ANY_IP"
            to "ANY_IP" 25 

     5 #DEFAULT: Block/nolog discard bootp, netbios, snmp, and rwho.
+2301,2519
       Deny   ANY UDP  nolog
          from "ANY_IP"
            to "ANY_IP" 9 67 68 137 138 161 513 2301 2519 

     6 #DEFAULT NO RIP: Block/nolog rip.
       Deny   ANY UDP  nolog
          from "ANY_IP"
            to "ANY_IP" 520 

     7 #DEFAULT RIP: Accept UDP rip.
       DISABLED - Accept ANY UDP 
          from "ANY_IP"
            to "ANY_IP" 520 

     8 #DEFAULT RIP: Accept IGMP multicast for router addresses.
       DISABLED - Accept ANY 2   
          from "ANY_IP"
            to 224.0.0.0/255.255.255.0

     9 #DEFAULT RIP: Accept router solicititations and advertisements
       DISABLED - Accept ANY ICMP
          from "ANY_IP"
            to 224.0.0.0/255.255.255.0 9 10 

    10 #DEFAULT STEALTH: Block with alarm any other access to external
interface.
       DISABLED - Deny   "EXTERNAL" ALL  alarm
          from "ANY_IP"
            to "ANY_IP"

    11 #DEFAULT: Accept/nolog authentication (ident).
       DISABLED - Accept ANY TCP  nolog
          from "ANY_IP"
            to "ANY_IP" 113 

    12 #DEFAULT: Allow pings and ICMP traceroutes to GNAT Box.
       DISABLED - Accept ANY ICMP
          from "ANY_IP" 8 
            to "ANY_IP" 8 

    13 #DEFAULT: Allow UDP traceroutes to GNAT Box.
       Deny   ANY UDP  nolog genICMP
          from "ANY_IP"
            to "ANY_IP" 32767:65535 

    14 #DEFAULT: Block/nolog stale WWW accesses.
       Deny   ANY TCP  nolog
          from "ANY_IP" 80 
            to "ANY_IP" 1024:65535 

    15 #DEFAULT: Block with alarm any other access to all interfaces.
       Deny   ANY ALL  alarm
          from "ANY_IP"
            to "ANY_IP"

  TIME GROUPS
    None

  PROTOCOLS
    Index  Name        Number
    -----  ----------  ------
    1      IGMP        2
    2      ESP         50
    3      AH          51

  PREFERENCES
    DEFAULT LOGGING
        Log ALL packets rejected.

    ALARMS
        Send email for alarms when 80 seen within 120 seconds.
        Send a maximum of 500 alarms per email.
        Do not attempt to log host names using reverse DNS.

    GENERAL
                    Stealth mode: disabled 
        Doorknob twists generate: alarm logMessage
         Address spoofs generate: alarm logMessage

    EMAIL SERVER
           disabled

    SNMP TRAPS
           disabled

    PAGER
           disabled

IP PASS THROUGH
  HOSTS/NETWORKS
    Index  Object or Address Range           Interface            Options
    -----  --------------------------------  ------------------   ---------

  FILTERS
    none

NAT

  INBOUND TUNNELS
    Index  Protocol  From IP Address  Port   To IP Address    Port   Options
    -----  --------  ---------------  -----  ---------------  ----- 
-----------

  TIMEOUTS
                      ICMP: 15 seconds
          TCP wait for ACK: 30 seconds
                       TCP: 600 seconds
    TCP keep alive enabled: yes
                       UDP: 600 seconds
          Wait after close: 20 seconds



--------------------------------------------------------------------------------
Copyright � 1996-2000 Global Technology Associates, Inc.

____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1

Reply via email to