1.  Use GBAdmin or the Web Interface to look at
    System Activity -> Active VPNs.  If the VPN
    does not show up, then the problem is in the
    VPN connection.

2.  If the VPN connection shows up in Active VPNs,
    then the chances are that you have a problem
    with the passthrough filters.  If you default
    the passthrough filters (IP Passthrough ->
    Filters), then the correct filters will be
    created for you.  If you already have created
    IP Passthrough for other things, then the best
    way to default your rules without loosing your
    work is to use GBAdmin, copy your existing
    filters to the clipboard, default the filters,
    and paste the saved rules back in.

    If you use are running a version of GNATBox
    older than 3.2.2, then after you default the
    IP Passthrough filters you will need to change
    the "VPN, deny inbound" rule to "accept" and
    enable it.

Mike Burden
Lynk Systems
http://www.lynk.com
(616)532-4985
[EMAIL PROTECTED]



> -----Original Message-----
> From: Pierre Stone [mailto:[EMAIL PROTECTED]] 
> Sent: Friday, January 25, 2002 7:58 AM
> To: 'Gnatbox'
> Subject: [gb-users] A VPN Question
> 
> 
> Hi Guys
> 
> We use two GB-Flash 3.23 for our two offices connect to Internet by
> using ADSL, now we like to use VPN to connect these two sites. But we
> found:
> 
> GB-A:
> INT:192.168.37.251
> EXT:203.xxx.10.62
> Network:192.168.37.0/255.255.255.0
> 
> GB-B
> INT:192.168.6.242
> EXT:210.xxx.71.102
> Network:192.168.6.0/255.255.255.0
> 
> Testing Result:
> 192.168.37.0/255.255.255.0   Can PING to  192.168.6.0 / 255.255.255.0
> 192.168.6.0 / 255.255.255.0 Can PING to 192.168.37.0 / 255.255.255.0
> 
> But:
> GB-A_INT  PING  GB-B_Network  ?Fail
> GB-A_INT  PING  GB-B_EXT        ?OK
> 
> GB-B_INT  PING  GB-A_Network  ?Fail
> GB-B_INT  PING  GB-A_EXT        ?OK
> 
> Is this a normal  situation? Or something I did wrong? Any idea?
> 
> Pierre Stone
> American Institute in Taiwan
> Internet LAN Manager
> 
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> To subscribe to the digest version first unsubscribe, then
>  e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
> 
> 
> 

Reply via email to