Joe, I think I found at least part of an answer for you. I looks like this is going to support a method for VPN Clients to Authenticate with the GNAT Box.
Mike Burden Lynk Systems http://www.lynk.com (616)532-4985 [EMAIL PROTECTED] ----------------------------------------------------------------------- Authorization This feature, when enabled, requires the user to run the GBAuth User Authentication program before initiating a VPN connection. A default Remote Access Filter for VPN's is set in the GNAT Box firewall system software. Once this feature is enabled, this Remote Access Filter can be enabled automatically by defaulting the Remote Access Filters. - Enable Authentication Select this check box to enable use of the Authentication Server. - Server Port The default port for the Authentication Server is port 76. If you wish to change this enter the new port number and make sure you change the Remote Access filter associated with the Authentication Server to match the new port number. ----------------------------------------------------------------------- > -----Original Message----- > From: Joseph C. Bender [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, April 09, 2002 3:19 PM > To: [EMAIL PROTECTED] > Subject: [gb-users] Authorization server > > > I recently upgraded to 3.2.5 on my GB-Flash, and I was > wondering what this > "Authorization server" was under Administration/Authentication was? > > > Joseph C. Bender > IT Systems Analyst > <[EMAIL PROTECTED]> > #include <standard_disclaimer.h> > My opinions are not that of my employer unless otherwise stated. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > To subscribe to the digest version first unsubscribe, then > e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > Archive of the last 1000 messages: > http://www.mail-archive.com/[email protected] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/[email protected]
