I have used both a RoBoX and GB1000 configured from scratch for DHCP on the EXT I/F without problems - however I have never 'switched' from static to dynamic so am unable to advise if that breaks anything. But from scratch NADA!
Best Regards, Steve Leach Network Manager Mi International Limited Eaglescliffe Logistics Centre Durham Lane Egglescliffe URL: http://www.askalix.com TEL: 01642 356205 e-mail: [EMAIL PROTECTED] ----- Original Message ----- From: "Trevor Novak" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 24, 2002 7:32 PM Subject: [gb-users] DHCP On External IF My I.S.P. required that I flip my external interface over from a static address to a dynamic one. Since doing this, I get an "unknown error" message whenever I do an update all sections. Has anyone else experienced this problem when switching to a dynamic address. I've already tried different floppies and floppy drives. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/[email protected] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/[email protected]
