On 07/23/2018 02:14 PM, Sam Tebbs wrote:


On 07/23/2018 12:38 PM, Renlin Li wrote:
+(define_insn "*aarch64_bfxil<mode>"
+  [(set (match_operand:GPI 0 "register_operand" "=r,r")
+    (ior:GPI (and:GPI (match_operand:GPI 1 "register_operand" "r,0")
+            (match_operand:GPI 3 "const_int_operand" "n, Ulc"))
+        (and:GPI (match_operand:GPI 2 "register_operand" "0,r")
+            (match_operand:GPI 4 "const_int_operand" "Ulc, n"))))]
+  "INTVAL (operands[3]) == ~INTVAL (operands[4])"
+  {
+    switch (which_alternative)
+    {
+      case 0:
+    operands[3] = GEN_INT (ceil_log2 (INTVAL (operands[3])));
+    return "bfxil\\t%<w>0, %<w>1, 0, %3";
+      case 1:
+    operands[3] = GEN_INT (ceil_log2 (INTVAL (operands[4])));
+    return "bfxil\\t%<w>0, %<w>2, 0, %3";
+      default:
+    gcc_unreachable ();
+    }
+  }
+  [(set_attr "type" "bfm")]
+)

Hi Sam,

Is it possible that operand[3] or operand[4] is 1?

ceil_log2() could return 0 if the argument is 1.
The width field of the resulting instruction will be 0. Is it still correct?

Regard,
Renlin


Hi Renlin,

I think you have found an edge-case that I didn't think of and that the code would fail under. I have added a check for this situation and will send the updated patch soon.

Thanks,
Sam

Here is the updated patch that fixes the problem outlined by Renlin, and adds another testcase to check for the same issue. The changelog and example from my earlier email (sent on 07/20/2018 10:31 AM) still apply.

Thanks,
Sam


On 07/20/2018 10:33 AM, Sam Tebbs wrote:
Please disregard the original patch and see this updated version.


On 07/20/2018 10:31 AM, Sam Tebbs wrote:
Hi all,

Here is an updated patch that does the following:

* Adds a new constraint in config/aarch64/constraints.md to check for a constant integer that is left consecutive. This addresses Richard Henderson's suggestion about combining the aarch64_is_left_consecutive call and the const_int match in the pattern.

* Merges the two patterns defined into one.

* Changes the pattern's type attribute to bfm.

* Improved the comment above the aarch64_is_left_consecutive implementation.

* Makes the pattern use the GPI iterator to accept smaller integer sizes (an extra test is added to check for this).

* Improves the tests in combine_bfxil.c to ensure they aren't optimised away and that they check for the pattern's correctness.

Below is a new changelog and the example given before.

Is this OK for trunk?

This patch adds an optimisation that exploits the AArch64 BFXIL instruction when or-ing the result of two bitwise and operations with non-overlapping
bitmasks (e.g. (a & 0xFFFF0000) | (b & 0x0000FFFF)).

Example:

unsigned long long combine(unsigned long long a, unsigned long long b) {
  return (a & 0xffffffff00000000ll) | (b & 0x00000000ffffffffll);
}

void read(unsigned long long a, unsigned long long b, unsigned long long *c) {
  *c = combine(a, b);
}

When compiled with -O2, read would result in:

read:
  and   x5, x1, #0xffffffff
  and   x4, x0, #0xffffffff00000000
  orr   x4, x4, x5
  str   x4, [x2]
  ret

But with this patch results in:

read:
  mov    x4, x0
  bfxil    x4, x1, 0, 32
  str    x4, [x2]
  ret



Bootstrapped and regtested on aarch64-none-linux-gnu and aarch64-none-elf with no regressions.


gcc/
2018-07-11  Sam Tebbs  <sam.te...@arm.com>

        PR target/85628
        * config/aarch64/aarch64.md (*aarch64_bfxil):
        Define.
        * config/aarch64/constraints.md (Ulc): Define
        * config/aarch64/aarch64-protos.h (aarch64_is_left_consecutive):
        Define.
        * config/aarch64/aarch64.c (aarch64_is_left_consecutive): New function.

gcc/testsuite
2018-07-11  Sam Tebbs  <sam.te...@arm.com>

        PR target/85628
        * gcc.target/aarch64/combine_bfxil.c: New file.
        * gcc.target/aarch64/combine_bfxil_2.c: New file.


On 07/19/2018 02:02 PM, Sam Tebbs wrote:
Hi Richard,

Thanks for the feedback. I find that using "is_left_consecutive" is more descriptive than checking for it being a power of 2 - 1, since it describes the requirement (having consecutive ones from the MSB) more explicitly. I would be happy to change it though if that is the consensus.

I have addressed your point about just returning the string instead of using output_asm_insn and have changed it locally. I'll send an updated patch soon.


On 07/17/2018 02:33 AM, Richard Henderson wrote:
On 07/16/2018 10:10 AM, Sam Tebbs wrote:
+++ b/gcc/config/aarch64/aarch64.c
@@ -1439,6 +1439,14 @@ aarch64_hard_regno_caller_save_mode (unsigned regno, unsigned,
      return SImode;
  }
  +/* Implement IS_LEFT_CONSECUTIVE.  Check if an integer's bits are consecutive
+   ones from the MSB.  */
+bool
+aarch64_is_left_consecutive (HOST_WIDE_INT i)
+{
+  return (i | (i - 1)) == HOST_WIDE_INT_M1;
+}
+
...
+(define_insn "*aarch64_bfxil"
+  [(set (match_operand:DI 0 "register_operand" "=r")
+    (ior:DI (and:DI (match_operand:DI 1 "register_operand" "r")
+            (match_operand 3 "const_int_operand"))
+        (and:DI (match_operand:DI 2 "register_operand" "0")
+            (match_operand 4 "const_int_operand"))))]
+  "INTVAL (operands[3]) == ~INTVAL (operands[4])
+    && aarch64_is_left_consecutive (INTVAL (operands[4]))"
Better is to use a define_predicate to merge both that second test and the
const_int_operand.

(I'm not sure about the "left_consecutive" language either.
Isn't it more descriptive to say that op3 is a power of 2 minus 1?)

(define_predicate "pow2m1_operand"
   (and (match_code "const_int")
        (match_test "exact_pow2 (INTVAL(op) + 1) > 0")))

and use

   (match_operand:DI 3 "pow2m1_operand")

and then just the

   INTVAL (operands[3]) == ~INTVAL (operands[4])

test.

Also, don't omit the modes for the constants.
Also, there's no reason this applies only to DI mode;
use the GPI iterator and %<w> in the output template.

+    HOST_WIDE_INT op3 = INTVAL (operands[3]);
+    operands[3] = GEN_INT (ceil_log2 (op3));
+    output_asm_insn ("bfxil\\t%0, %1, 0, %3", operands);
+    return "";
You can just return the string that you passed to output_asm_insn.

+  }
+  [(set_attr "type" "bfx")]
The other aliases of the BFM insn use type "bfm";
"bfx" appears to be aliases of UBFM and SBFM.
Not that it appears to matter to the scheduling
descriptions, but it is inconsistent.


r~





diff --git a/gcc/config/aarch64/aarch64-protos.h b/gcc/config/aarch64/aarch64-protos.h
index af5db9c595385f7586692258f750b6aceb3ed9c8..01d9e1bd634572fcfa60208ba4dc541805af5ccd 100644
--- a/gcc/config/aarch64/aarch64-protos.h
+++ b/gcc/config/aarch64/aarch64-protos.h
@@ -574,4 +574,6 @@ rtl_opt_pass *make_pass_fma_steering (gcc::context *ctxt);
 
 poly_uint64 aarch64_regmode_natural_size (machine_mode);
 
+bool aarch64_is_left_consecutive (HOST_WIDE_INT);
+
 #endif /* GCC_AARCH64_PROTOS_H */
diff --git a/gcc/config/aarch64/aarch64.c b/gcc/config/aarch64/aarch64.c
index fa01475aa9ee579b6a3b2526295b622157120660..3cfa51b15af3e241672f1383cf881c12a44494a5 100644
--- a/gcc/config/aarch64/aarch64.c
+++ b/gcc/config/aarch64/aarch64.c
@@ -1454,6 +1454,14 @@ aarch64_hard_regno_caller_save_mode (unsigned regno, unsigned,
     return SImode;
 }
 
+/* Implement IS_LEFT_CONSECUTIVE.  Check if I's bits are consecutive
+   ones from the MSB.  */
+bool
+aarch64_is_left_consecutive (HOST_WIDE_INT i)
+{
+  return (i | (i - 1)) == HOST_WIDE_INT_M1;
+}
+
 /* Implement TARGET_CONSTANT_ALIGNMENT.  Make strings word-aligned so
    that strcpy from constants will be faster.  */
 
diff --git a/gcc/config/aarch64/aarch64.md b/gcc/config/aarch64/aarch64.md
index e9c16f9697b766a5c56b6269a83b7276654c5668..08710168bd476799c0c22b7472766dcd41fde679 100644
--- a/gcc/config/aarch64/aarch64.md
+++ b/gcc/config/aarch64/aarch64.md
@@ -5305,6 +5305,29 @@
   [(set_attr "type" "rev")]
 )
 
+(define_insn "*aarch64_bfxil<mode>"
+  [(set (match_operand:GPI 0 "register_operand" "=r,r")
+    (ior:GPI (and:GPI (match_operand:GPI 1 "register_operand" "r,0")
+		    (match_operand:GPI 3 "const_int_operand" "n, Ulc"))
+	    (and:GPI (match_operand:GPI 2 "register_operand" "0,r")
+		    (match_operand:GPI 4 "const_int_operand" "Ulc, n"))))]
+  "INTVAL (operands[3]) == ~INTVAL (operands[4])"
+  {
+    switch (which_alternative)
+    {
+      case 0:
+	operands[3] = GEN_INT (ctz_hwi (~INTVAL (operands[3])));
+	return "bfxil\\t%<w>0, %<w>1, 0, %3";
+      case 1:
+	operands[3] = GEN_INT (ctz_hwi (~INTVAL (operands[4])));
+	return "bfxil\\t%<w>0, %<w>2, 0, %3";
+      default:
+	gcc_unreachable ();
+    }
+  }
+  [(set_attr "type" "bfm")]
+)
+
 ;; There are no canonicalisation rules for the position of the lshiftrt, ashift
 ;; operations within an IOR/AND RTX, therefore we have two patterns matching
 ;; each valid permutation.
diff --git a/gcc/config/aarch64/constraints.md b/gcc/config/aarch64/constraints.md
index 72cacdabdac52dcb40b480f7a5bfbf4997c742d8..5bae0b70bbd11013a9fb27ec19cf7467eb20135f 100644
--- a/gcc/config/aarch64/constraints.md
+++ b/gcc/config/aarch64/constraints.md
@@ -172,6 +172,13 @@
   A constraint that matches the immediate constant -1."
   (match_test "op == constm1_rtx"))
 
+(define_constraint "Ulc"
+ "@internal
+ A constraint that matches a constant integer whose bits are consecutive ones
+ from the MSB."
+ (and (match_code "const_int")
+      (match_test "aarch64_is_left_consecutive (ival)")))
+
 (define_constraint "Usv"
   "@internal
    A constraint that matches a VG-based constant that can be loaded by
diff --git a/gcc/testsuite/gcc.target/aarch64/combine_bfxil.c b/gcc/testsuite/gcc.target/aarch64/combine_bfxil.c
new file mode 100644
index 0000000000000000000000000000000000000000..3bc1dd5b216477efe7494dbcdac7a5bf465af218
--- /dev/null
+++ b/gcc/testsuite/gcc.target/aarch64/combine_bfxil.c
@@ -0,0 +1,98 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps" } */
+
+extern void abort(void);
+
+unsigned long long
+combine_balanced (unsigned long long a, unsigned long long b)
+{
+  return (a & 0xffffffff00000000ll) | (b & 0x00000000ffffffffll);
+}
+
+unsigned long long
+combine_minimal (unsigned long long a, unsigned long long b)
+{
+  return (a & 0xfffffffffffffffe) | (b & 0x0000000000000001);
+}
+
+unsigned long long
+combine_unbalanced (unsigned long long a, unsigned long long b)
+{
+  return (a & 0xffffffffff000000ll) | (b & 0x0000000000ffffffll);
+}
+
+unsigned int
+combine_balanced_int (unsigned int a, unsigned int b)
+{
+  return (a & 0xffff0000ll) | (b & 0x0000ffffll);
+}
+
+unsigned int
+combine_unbalanced_int (unsigned int a, unsigned int b)
+{
+  return (a & 0xffffff00ll) | (b & 0x000000ffll);
+}
+
+__attribute__ ((noinline)) void
+foo (unsigned long long a, unsigned long long b, unsigned long long *c,
+  unsigned long long *d)
+{
+  *c = combine_minimal(a, b);
+  *d = combine_minimal(b, a);
+}
+
+__attribute__ ((noinline)) void
+foo2 (unsigned long long a, unsigned long long b, unsigned long long *c,
+  unsigned long long *d)
+{
+  *c = combine_balanced (a, b);
+  *d = combine_balanced (b, a);
+}
+
+__attribute__ ((noinline)) void
+foo3 (unsigned long long a, unsigned long long b, unsigned long long *c,
+  unsigned long long *d)
+{
+  *c = combine_unbalanced (a, b);
+  *d = combine_unbalanced (b, a);
+}
+
+void
+foo4 (unsigned int a, unsigned int b, unsigned int *c, unsigned int *d)
+{
+  *c = combine_balanced_int(a, b);
+  *d = combine_balanced_int(b, a);
+}
+
+void
+foo5 (unsigned int a, unsigned int b, unsigned int *c, unsigned int *d)
+{
+  *c = combine_unbalanced_int(a, b);
+  *d = combine_unbalanced_int(b, a);
+}
+
+int
+main(void)
+{
+  unsigned long long a = 0x0123456789ABCDEF, b = 0xFEDCBA9876543210, c, d;
+  foo3(a, b, &c, &d);
+  if(c != 0x0123456789543210) abort();
+  if(d != 0xfedcba9876abcdef) abort();
+  foo2(a, b, &c, &d);
+  if(c != 0x0123456776543210) abort();
+  if(d != 0xfedcba9889abcdef) abort();
+  foo(a, b, &c, &d);
+  if(c != 0x0123456789abcdee) abort();
+  if(d != 0xfedcba9876543211) abort();
+
+  unsigned int a2 = 0x01234567, b2 = 0xFEDCBA98, c2, d2;
+  foo4(a2, b2, &c2, &d2);
+  if(c2 != 0x0123ba98) abort();
+  if(d2 != 0xfedc4567) abort();
+  foo5(a2, b2, &c2, &d2);
+  if(c2 != 0x01234598) abort();
+  if(d2 != 0xfedcba67) abort();
+  return 0;
+}
+
+/* { dg-final { scan-assembler-times "bfxil\\t" 10 } } */
diff --git a/gcc/testsuite/gcc.target/aarch64/combine_bfxil_2.c b/gcc/testsuite/gcc.target/aarch64/combine_bfxil_2.c
new file mode 100644
index 0000000000000000000000000000000000000000..0fc140443bc67bcf12b93d72b7970e095620021e
--- /dev/null
+++ b/gcc/testsuite/gcc.target/aarch64/combine_bfxil_2.c
@@ -0,0 +1,16 @@
+/* { dg-do compile } */
+/* { dg-options "-O2" } */
+
+unsigned long long
+combine_non_consecutive (unsigned long long a, unsigned long long b)
+{
+  return (a & 0xfffffff200f00000ll) | (b & 0x00001000ffffffffll);
+}
+
+void
+foo4 (unsigned long long a, unsigned long long b, unsigned long long *c,
+  unsigned long long *d) {
+  /* { dg-final { scan-assembler-not "bfxil\\t" } } */
+  *c = combine_non_consecutive (a, b);
+  *d = combine_non_consecutive (b, a);
+}

Reply via email to