Brice,

On May 6, 2010, at 12:47 PM, Brice Lambi wrote:

Hi Allen,

Are you compiling from source?

- No, I'm using easy_install which came with setuptools. We are building about 30 packages that we need to push out to 50 workstations for our developers. I was hoping to avoid building everything from source as much as possible, as I am going to have to script all this to get it to all the workstations. So easy_install
          looked good for all the python modules we have to install.

When I install gdal python I just go
into the swig/python directory and run 'python setup.py install'. This
should work.  The steps I take:

tar zxvf gdal-1.7.1.tar.gz
cd gdal-1.7.1
./configure --prefix=/usr
make
make install #run as root
cd swig/python
python setup.py install #run as root

        - I will give this a try.

Hope this helps.

        Thank you very much.


Cheers,
Brice


Allen Rongone wrote:
Hello All,

   New here so don't beat me up to bad.

I'm trying to get the GDAL module to install on a Red Hat Enterprise
Linux 5.4 64-bit workstation running Python 2.6.5.

   I have installed the setuptools 0.6c11 and am using easy_install

My gdal-config is in /usr/bin, however, when I run easy_install GDAL it complains that it "Could not run gdal-config!!!" and then contiues on
complaining about a bunch of stuff not
   being declared.

   I can not find the setup.py to edit and change the location of
gdal-config. easy_install must clean everything up if it fails.



   Does anyone know how to get this to work or will we have to do
without GDAL in python?

Thanks for any help,
Allen

I've included everything I thought pertinent below:


[r...@psd14 ~]# uname -a
Linux psd14.aer.com 2.6.18-164.15.1.el5 #1 SMP Mon Mar 1 10:56:08 EST
2010 x86_64 x86_64 x86_64 GNU/Linux
[r...@psd14 ~]# python
Python 2.6.5 (r265:79063, May  3 2010, 14:23:56)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] on linux2
Type "help", "copyright", "credits" or "license" for more information.

KeyboardInterrupt

[r...@psd14 ~]# which gdal-config
/usr/bin/gdal-config
[r...@psd14 ~]# easy_install GDAL
Searching for GDAL
Reading http://pypi.python.org/simple/GDAL/
Reading http://www.gdal.org
Best match: GDAL 1.7.1
Downloading
http://pypi.python.org/packages/source/G/GDAL/ GDAL-1.7.1.tar.gz#md5=38b838d528b309a28a3aa24d4fcef3cd

Processing GDAL-1.7.1.tar.gz
Running GDAL-1.7.1/setup.py -q bdist_egg --dist-dir
/tmp/easy_install-eKZHzW/GDAL-1.7.1/egg-dist-tmp-siVuDI
Could not run gdal-config!!!!
cc1plus: warning: command line option "-Wstrict-prototypes" is valid for
Ada/C/ObjC but not for C++
extensions/gdal_wrap.cpp: In function $(B!F(Bint
GDALDriverShadow_Rename(GDALDriverShadow*, const char*, const
char*)$(B!G(B:
extensions/gdal_wrap.cpp:3371: error:
$(B!F(BGDALRenameDataset$(B!G(B was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(BCPLErr
GDALDatasetShadow_CreateMaskBand(GDALDatasetShadow*, int)$(B!G(B:
extensions/gdal_wrap.cpp:3744: error:
$(B!F(BGDALCreateDatasetMaskBand$(B!G(B was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bchar**
GDALDatasetShadow_GetFileList(GDALDatasetShadow*)$(B!G(B:
extensions/gdal_wrap.cpp:3747: error: $(B!F(BGDALGetFileList$(B! G(B
was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(BGDALRasterBandShadow*
GDALRasterBandShadow_GetMaskBand(GDALRasterBandShadow*)$(B!G(B:
extensions/gdal_wrap.cpp:4077: error: $(B!F(BGDALGetMaskBand$(B! G(B
was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bint
GDALRasterBandShadow_GetMaskFlags(GDALRasterBandShadow*)$(B!G(B:
extensions/gdal_wrap.cpp:4080: error: $(B!F(BGDALGetMaskFlags$(B! G(B
was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(BCPLErr
GDALRasterBandShadow_CreateMaskBand(GDALRasterBandShadow*, int)$(B! G(B:
extensions/gdal_wrap.cpp:4083: error:
$(B!F(BGDALCreateMaskBand$(B!G(B was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bvoid
GDALColorTableShadow_CreateColorRamp(GDALColorTableShadow*, int, const
GDALColorEntry*, int, const GDALColorEntry*)$(B!G(B:
extensions/gdal_wrap.cpp:4147: error:
$(B!F(BGDALCreateColorRamp$(B!G(B was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bint
ComputeProximity(GDALRasterBandShadow*, GDALRasterBandShadow*, char**,
int (*)(double, const char*, void*), void*)$(B!G(B:
extensions/gdal_wrap.cpp:4306: error:
$(B!F(BGDALComputeProximity$(B!G(B was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bint
RasterizeLayer(GDALDatasetShadow*, int, int*, OGRLayerShadow*, void*,
void*, int, double*, char**, int (*)(double, const char*, void*),
void*)$(B!G(B:
extensions/gdal_wrap.cpp:4342: error:
$(B!F(BGDALRasterizeLayers$(B!G(B was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bint
Polygonize(GDALRasterBandShadow*, GDALRasterBandShadow*,
OGRLayerShadow*, int, char**, int (*)(double, const char*, void*),
void*)$(B!G(B:
extensions/gdal_wrap.cpp:4362: error: $(B!F(BGDALPolygonize$(B! G(B
was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bint
FillNodata(GDALRasterBandShadow*, GDALRasterBandShadow*, double, int,
char**, int (*)(double, const char*, void*), void*)$(B!G(B:
extensions/gdal_wrap.cpp:4378: error: $(B!F(BGDALFillNodata$(B! G(B
was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bint
SieveFilter(GDALRasterBandShadow*, GDALRasterBandShadow*,
GDALRasterBandShadow*, int, int, char**, int (*)(double, const char*,
void*), void*)$(B!G(B:
extensions/gdal_wrap.cpp:4394: error: $(B!F(BGDALSieveFilter$(B! G(B
was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bint
RegenerateOverviews(GDALRasterBandShadow*, int, GDALRasterBandShadow**,
const char*, int (*)(double, const char*, void*), void*)$(B!G(B:
extensions/gdal_wrap.cpp:4408: error: invalid conversion from
$(B!F(BGDALRasterBandShadow*$(B!G(B to $(B!F(BGDALRasterBand* $(B!G
(Bextensions/gdal_wrap.cpp:4408: error:   initializing argument 1
of $(B!F(BCPLErr GDALRegenerateOverviews(GDALRasterBand*, int,
GDALRasterBand**, const char*, int (*)(double, const char*, void*),
void*)$(B!G
(Bextensions/gdal_wrap.cpp:4408: error: invalid conversion from
$(B!F(BGDALRasterBandShadow**$(B!G(B to $(B! F(BGDALRasterBand**$(B!G
(Bextensions/gdal_wrap.cpp:4408: error:   initializing argument 3
of $(B!F(BCPLErr GDALRegenerateOverviews(GDALRasterBand*, int,
GDALRasterBand**, const char*, int (*)(double, const char*, void*),
void*)$(B!G
(Bextensions/gdal_wrap.cpp: In function $(B!F(Bint
RegenerateOverview(GDALRasterBandShadow*, GDALRasterBandShadow*, const
char*, int (*)(double, const char*, void*), void*)$(B!G(B:
extensions/gdal_wrap.cpp:4421: error: invalid conversion from
$(B!F(BGDALRasterBandShadow*$(B!G(B to $(B!F(BGDALRasterBand* $(B!G
(Bextensions/gdal_wrap.cpp:4421: error:   initializing argument 1
of $(B!F(BCPLErr GDALRegenerateOverviews(GDALRasterBand*, int,
GDALRasterBand**, const char*, int (*)(double, const char*, void*),
void*)$(B!G
(Bextensions/gdal_wrap.cpp:4421: error: invalid conversion from
$(B!F(BGDALRasterBandShadow**$(B!G(B to $(B! F(BGDALRasterBand**$(B!G
(Bextensions/gdal_wrap.cpp:4421: error:   initializing argument 3
of $(B!F(BCPLErr GDALRegenerateOverviews(GDALRasterBand*, int,
GDALRasterBand**, const char*, int (*)(double, const char*, void*),
void*)$(B!G
(Bextensions/gdal_wrap.cpp: In function
$(B!F(BGDALTransformerInfoShadow*
new_GDALTransformerInfoShadow(GDALDatasetShadow*,
GDALDatasetShadow*, char**)$(B!G(B:
extensions/gdal_wrap.cpp:4445: error:
$(B!F(BGDALCreateGenImgProjTransformer2$(B!G(B was not declared in
this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bint
GDALTransformerInfoShadow_TransformPoint__SWIG_0 (GDALTransformerInfoShadow*,
int, double*)$(B!G(B:
extensions/gdal_wrap.cpp:4456: error:
$(B!F(BGDALUseTransformer$(B!G(B was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bint
GDALTransformerInfoShadow_TransformPoint__SWIG_1 (GDALTransformerInfoShadow*,
double*, int, double, double, double)$(B!G(B:
extensions/gdal_wrap.cpp:4468: error:
$(B!F(BGDALUseTransformer$(B!G(B was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(Bint
GDALTransformerInfoShadow_TransformPoints(GDALTransformerInfoShadow*,
int, int, double*, double*, double*, int*)$(B!G(B:
extensions/gdal_wrap.cpp:4550: error:
$(B!F(BGDALUseTransformer$(B!G(B was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(BGDALDriverShadow*
IdentifyDriver(const char*, char**)$(B!G(B:
extensions/gdal_wrap.cpp:4661: error:
$(B!F(BGDALIdentifyDriver$(B!G(B was not declared in this scope
extensions/gdal_wrap.cpp: In function $(B!F(BPyObject*
_wrap_ReadDir(PyObject*, PyObject*)$(B!G(B:
extensions/gdal_wrap.cpp:5255: error: $(B!F(BVSIReadDir$(B!G(B was
not declared in this scope
error: Setup script exited with error: command 'gcc' failed with exit
status 1
[r...@psd14 ~]#

_______________________________________________
gdal-dev mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/gdal-dev


_______________________________________________
gdal-dev mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/gdal-dev

Reply via email to