Sebastian,
Any particular reason why you would want to use that so old and abandoned
format (-of GMT)? Do not confuse it with the netCDF CF that GMT uses since
GMT 4.0 (released many years ago). Note also that in GMT5 you can use the
GeoTiff directly, or convert it with grdreformat or with gdal_translate
but to netCDF (not to 'GMT')
Joaquim
Hello,
I have a problem with the following GeoTIFF:
gdalinfo IMAGE.tif
Driver: GTiff/GeoTIFF
Files: IMAGEDATA/IMAGE.tif
Size is 46800, 55200
Coordinate System is:
PROJCS["WGS 84 / UTM zone 30S",
GEOGCS["WGS 84",
DATUM["WGS_1984",
SPHEROID["WGS 84",6378137,298.257223563,
AUTHORITY["EPSG","7030"]],
AUTHORITY["EPSG","6326"]],
PRIMEM["Greenwich",0],
UNIT["degree",0.0174532925199433],
AUTHORITY["EPSG","4326"]],
PROJECTION["Transverse_Mercator"],
PARAMETER["latitude_of_origin",0],
PARAMETER["central_meridian",-3],
PARAMETER["scale_factor",0.9996],
PARAMETER["false_easting",500000],
PARAMETER["false_northing",10000000],
UNIT["metre",1,
AUTHORITY["EPSG","9001"]],
AUTHORITY["EPSG","32730"]]
Origin = (422999.375000000000000,2201000.625000000000000)
Pixel Size = (1.250000000000000,-1.250000000000000)
Metadata:
AREA_OR_POINT=Point
Image Structure Metadata:
COMPRESSION=PACKBITS
INTERLEAVE=BAND
Corner Coordinates:
Upper Left ( 422999.375, 2201000.625) ( 5d 2'44.07"W, 70d17' 7.59"S)
Lower Left ( 422999.375, 2132000.625) ( 5d 6'33.10"W, 70d54'13.43"S)
Upper Right ( 481499.375, 2201000.625) ( 3d29'30.00"W, 70d17'46.95"S)
Lower Right ( 481499.375, 2132000.625) ( 3d30'25.10"W, 70d54'54.17"S)
Center ( 452249.375, 2166500.625) ( 4d17'17.74"W, 70d36' 6.69"S)
Band 1 Block=46800x1 Type=UInt16, ColorInterp=Gray
I want to translate it into a GMT grid file using gdal_translate:
gdal_translate -of GMT IMAGE.tif IMAGE.grd
But this produces an error and the file is not useable afterwards.
ERROR 1: nc_put_vara_double(IMAGE.grd): NetCDF: Start+count exceeds
dimension bound
gdalinfo IMAGE.grd
Warning 1: IMAGE.grd is a netCDF file, but not in GMT configuration.
gdalinfo failed - unable to open 'IMAGE.grd'.
Can anybody explain this and offer a solution?
Thanks in advance!
Sebastian.
_______________________________________________
gdal-dev mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/gdal-dev
_______________________________________________
gdal-dev mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/gdal-dev
