On 9/11/06, Jeff VR <[EMAIL PROTECTED]> wrote:
joeft wrote: > > Dan's suggestions are similar to what I've received from one of our > suppliers:
> Dan McMahill wrote:
>> >> The prefered shape and size is a filled circle of copper with solder >> mask completely removed. The diameter should be 1.0 mm. The >> diameter area free of soldermask should be 2x the diameter of the >> fiducial.
The fiducial below contains a 1mm diameter circle on the component and solder side of the board. The diameter of the soldermask is 2mm. (* jcl *) # FID-100PS-200MS Element[0x0 "FIDUCIAL" "" "" 0 0 0 0 0 100 0x0] ( Pad[0 0 0 0 3937 3937 7874 "" "1" 0x0800] Pad[0 0 0 0 3937 3937 7874 "" "1" 0x0880] ) -- http://www.luciani.org _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
