On 3/13/07, C P Tarun <[EMAIL PROTECTED]> wrote:
> And here's your netlist: > > unnamed_net2 R2-2 Q1-B R1-2 > unnamed_net1 R1-1 C1-2 > siggnd R2-1 Q2-E Q1-E C1-1 > > So what's wrong? Q1-B, Q1-E and Q2-E all exist, as in your schematic; > the other connections don't. I may be dense, but I don't see any > problem with what you have......You're not dense at all, the problem is with my description. The netlist is not in error. I am sorry for having used vague terms. The problems are as follows: 1. When I load the netlist into the PCB program, it gives errors saying that it couldn't find pins with the names given in the footprints, or some such thing. Just try loading my .pcb file first, then try loading the netlist, and you will see what I mean. This problem does not go away even after you :ExecuteFile(test-schem.cmd) 2. When I draw the ratsnest in the PCB program, there are _no_ ratlines to _any_ of the pins of the transistors. Those two devices are completely floating in mid-air. Basically, there is a mismatch between the pin names (numbers?) of the transistor symbols in gschem and the pins of the TO92 footprints in the PCB layout. This does not get fixed even after running the .cmd file, though it should.
Change the pin names to numbers in the schematic symbol files. Then the footprint pin numbers will map to schematic symbol pin numbers. (* jcl *) -- http://www.luciani.org _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
