On Sat, 2007-09-22 at 20:35 +0200, Stefan Salewski wrote: > I think that opamp-1.sym will not be compatible with SOT23-5 footprints > -- in TI datasheet of OPA656 pin 1 is output for SOT23 package. Maybe > opamp-1.sym is compatible with SC70-5 configuration, which I have newer > seen. > > Or opamp-1.sym and opamp-2.sym are only abstract representations of an > OpAmp, without any relationship to a concrete footprint? > > In any case, there seems to be no symbol in gEDA related to an ordinary > OpAmp in DIP8 (or SO8) package. > > This may look very strange for new gEDA/pcb users.
There are various "heavy" symbols, such as lm741-1.sym. It is a well known problem though, the mapping between a light symbol and a real package is not something which is easily solved. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
