On May 24, 2008, at 6:41 PM, Paul Probert wrote: > Paul Probert wrote: >> Folks, >> Today gschem got into a snit with one of my diagrams, and >> refused to >> make a connection when drawing a net from a pin on a symbol to >> another >> net. That is, the end of the net is left with the red box, and won't >> make the yellow dot when it hits another net. Also, the netlist will >> show a pin disconnected, as verified by PCB not showing any rats >> going >> to the pin. >> I suspect there's something in my schematic, some homemade symbol >> that's throwing it into a tizzy. All my pins are on 100 mil grids as >> far as I can tell. Anybody ever have this kind of trouble? >> I am using 1.4.0.20080127, on Gentoo. >> >> Thanks in advance, >> Paul Probert >> > I took a look at the .sch file with a text editor, and most, but > not > all, of the coordinates ended in 01, whereas in other diagrams of mine > that work they all end in 00. So I did a search and replace, and > now the > circuit is fine. So how did they get off by one mil?
Is it possible that you accidentally selected and moved stuff with the grid snap off? > > Paul Probert > > > > _______________________________________________ > geda-user mailing list > [email protected] > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user John Doty Noqsi Aerospace, Ltd. http://www.noqsi.com/ [EMAIL PROTECTED] _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
