Thanks for all replies, I noticed the same slow down even without any polygons, tracks, vias, ect. It is enough to add a few 4-5 big tqfp components. I've just made a completely new board with 5 TQFPs (40-200 pins) and it is slow. 100% cpu usage by X server every move and it that takes about 2-3 seconds to redraw component in new place. Oh I did not said that I have ordinary PCI graphics card, my machine does not have agp or pci-express. But still PCB cause much more load then any other app.
Michael Dnia 11 listopada 2008 22:09 Peter Clifton <[EMAIL PROTECTED]> napisał(a): > On Tue, 2008-11-11 at 15:34 -0500, DJ Delorie wrote: > > You're probably hitting the polygon dicer slowdown that many people > > see. Have you tried setting "thin draw polygon"? Otherwise, check > > the mailing list for the polygon dicer cache patch and see if that > > helps. > > Ah, that nasty.. If you're using polygons on the board, make a temporary > copy, then delete them. > > If it suddenly jumps back to lightning speed, yes.. the dicer cache > might help. > > I'll dust that patch off, and see if it is ready to commit, if no-one > objects. > > > -- > Peter Clifton > > Electrical Engineering Division, > Engineering Department, > University of Cambridge, > 9, JJ Thomson Avenue, > Cambridge > CB3 0FA > > Tel: +44 (0)7729 980173 - (No signal in the lab!) > > > > _______________________________________________ > geda-user mailing list > [email protected] > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user > _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
