Peter Clifton wrote:
On Wed, 2010-03-03 at 21:23 +0100, Stefan Salewski wrote:
On Wed, 2010-03-03 at 12:17 -0800, Steven Michalske wrote:
On Mar 3, 2010, at 12:10 PM, Stefan Salewski wrote:
Pin[-45000 -45000 5118 2000 6318 3937 "1" "1" "square"]
snip
Pin[-35000 -45000 5118 2000 6318 3937 "1" "1" "square"]
This part could not be netlisted.....
Chould the pins be named J1-1 through J1-20 and J2-1 through J2-20...
that would make it at least netlistable.
Steve
Sure -- I did care only about shape, not pin numbers.
On Wed, 2010-03-03 at 21:10 +0100, Stefan Salewski wrote:
I have generated a draft, just for fun. You have to check all dimensions
carefully and change pin names/numbers.
I do not know if something like J1-1 works, and I do not know Jims gschem
symbol.
I wonder if that syntax is tricking PCB, since internally it sometimes
refers to connections as <element_name>-<pinnumber>
Perhaps the pin identifier U102-J1-1 is causing issues.
Thanks everyone. I think I understand the issues. I'll just go with
pin numbers 1-40 and drop the J1 and J2 mess. It won't match the part,
but I can translate easy enough. There are only 6 connections, VCC, GND
MOSI MISO SS and SCLK. Most of the rest of the pins either go to ground
or VCC,
Jim.
_______________________________________________
geda-user mailing list
[email protected]
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
