On Wed, 2010-03-03 at 16:42 -0500, Jim wrote: > > Perhaps the pin identifier U102-J1-1 is causing issues. > > > > > Thanks everyone. I think I understand the issues. I'll just go with > pin numbers 1-40 and drop the J1 and J2 mess. It won't match the part, > but I can translate easy enough. There are only 6 connections, VCC, GND > MOSI MISO SS and SCLK. Most of the rest of the pins either go to ground > or VCC,
That was just a guess.. you might try "J1_1" as the pin number, for example, which will still closely match the part, but not (assuming this is the issue) confuse the net-list code. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
