Hi there. In the link below I put a image from a board I made with gEDA and PCB only (and some programs like sketch, gv, etc). The image is not good because it was made with a not-so-good scanner, but is just an example.
Any information you need I can help, just ask http://gpiclib.sourceforge.net/board1.jpg http://gpiclib.sourceforge.net/board2.jpg With best regards Xultz Curitiba - Brazil On Mon, 21 Jul 2003 18:49:55 -0700 (PDT) Alvin Oga <[EMAIL PROTECTED]> wrote: > > hi ya > > am curious ... is there anybody in the local SJ/SF area > that has used the pcb sw from geda package ?? > > i'm looking to make some small/simple pcb's and > would like a helping hand > > ( I will be making a small pcb with power switch, reset switch > ( and 3 led's -- for 1U boxes > > we'll make the resulting gerber etc downloadable for others > > and for fun, maybe even an 2 port rs232 board w/ two 10-conductor > ribbon cable to the motherboard > > c ya > alvin > > - some of the pcb vendors i'd like to have to make the pcb... > to test out what documents they need and their resulting > deliverables and quality and reliability etc > > http://www.linux-cae.net/PCB/ > > >
