On Thu, 23 Mar 2006, Steve Meier wrote: > Your pins have no clearances from copper polygons > > pin[x y padwidth clearence soldermask drill_width .......] > > Having no clearance all four pins will short if they are placed in a > board with power and ground planes. > > Has anyone got a list of "standard drill sizes"
Ah. Fixed that clearance problem by putting 3000 as the third parameter of the Pin[] things (and read the docs a bit closer). About "standard drill sizes". I arrived at the drill size by eyeballing the SW__Panasonic_EVQPA_Series posted two days ago. It looks like that one used a drill size of 4600, but I ended up using 5000. I noticed those Panasonic footprints have 0x0 as the first and last parameter of Element[] and 0x01 as the last parameter of Pin[]. What are the purpose of those parameters? > David Griffith wrote: > >I just now made this footprint for an ALPS 6mm through-hole tactile switch > >(Mouser #688-SKHHBV). Would someone please take a look at it and > >critique? > > > >Element["" "" "alps_6mm_tactile_th" "" 100000 90000 22500 10000 0 100 ""] > >( > > Pin[0 0 8000 0 8600 5000 "1" "1" ""] > > Pin[20000 0 8000 0 8600 5000 "2" "2" ""] > > Pin[0 30000 8000 0 8600 5000 "3" "3" ""] > > Pin[20000 30000 8000 0 8600 5000 "4" "4" ""] > > ElementLine [5000 0 15000 0 1000] > > ElementLine [5000 30000 15000 30000 1000] > > ElementLine [0 25000 20000 25000 1000] > > ElementLine [20000 25000 20000 5000 1000] > > ElementLine [20000 5000 0 5000 1000] > > ElementLine [0 5000 0 25000 1000] > > ElementArc [10000 15000 5000 5000 270 90 2000] > > ElementArc [10000 15000 5000 5000 180 90 2000] > > ElementArc [10000 15000 5000 5000 0 90 2000] > > ElementArc [10000 15000 5000 5000 90 90 2000] > > > > ) > > > > > > > > -- David Griffith [EMAIL PROTECTED] A: Because it fouls the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?
