On Thu, Mar 23, 2006 at 11:58:31PM -0800, Steve Meier wrote: > Your pins have no clearances from copper polygons > > pin[x y padwidth clearence soldermask drill_width .......] > > Having no clearance all four pins will short if they are placed in a > board with power and ground planes.
Do the footprints according to my guide so you will not forget to set it. CL< > > Has anyone got a list of "standard drill sizes" > > Steve Meier > > > David Griffith wrote: > >I just now made this footprint for an ALPS 6mm through-hole tactile switch > >(Mouser #688-SKHHBV). Would someone please take a look at it and > >critique? > > > >Element["" "" "alps_6mm_tactile_th" "" 100000 90000 22500 10000 0 100 ""] > >( > > Pin[0 0 8000 0 8600 5000 "1" "1" ""] > > Pin[20000 0 8000 0 8600 5000 "2" "2" ""] > > Pin[0 30000 8000 0 8600 5000 "3" "3" ""] > > Pin[20000 30000 8000 0 8600 5000 "4" "4" ""] > > ElementLine [5000 0 15000 0 1000] > > ElementLine [5000 30000 15000 30000 1000] > > ElementLine [0 25000 20000 25000 1000] > > ElementLine [20000 25000 20000 5000 1000] > > ElementLine [20000 5000 0 5000 1000] > > ElementLine [0 5000 0 25000 1000] > > ElementArc [10000 15000 5000 5000 270 90 2000] > > ElementArc [10000 15000 5000 5000 180 90 2000] > > ElementArc [10000 15000 5000 5000 0 90 2000] > > ElementArc [10000 15000 5000 5000 90 90 2000] > > > > ) > > > > > >
