Hello,
How do i figure out the gem5 variables for these McPAT components
I have figured out the core and others but I dont see any documentations
for these units
(maybe im not looking at the right place)
components which interests me are stated below
comp id = system.core.BTB
param name="BTB_config" value=?????
<component id="system.L1Directory0" name="L1Directory0">
<param name="Directory_type" value="1"/>
<param name="Dir_config" value="2048,16,1,1,1,6"/>
<param name="buffer_sizes" value="8,8,8,8"/>
<param name="clockrate" value="500"/>
<param name="ports" value="1,1,1"/>
<param name="device_type" value="2"/>
<stat name="read_accesses" value="0"/>
<stat name="write_accesses" value="0"/>
<stat name="read_misses" value="0"/>
<stat name="write_misses" value="0"/>
<stat name="conflicts" value="0"/>
</component>
<component id="system.mem" name="mem">
<param name="mem_tech_node" value="65"/>
<param name="device_clock" value="200"/>
<param name="peak_transfer_rate" value="6400"/>
<param name="internal_prefetch_of_DRAM_chip" value="4"/>
<param name="capacity_per_channel" value="4096"/>
<param name="number_ranks" value="2"/>
<param name="num_banks_of_DRAM_chip" value="8"/>
<param name="Block_width_of_DRAM_chip" value="64"/>
<param name="output_width_of_DRAM_chip" value="8"/>
<param name="page_size_of_DRAM_chip" value="8"/>
<param name="burstlength_of_DRAM_chip" value="8"/>
<stat name="memory_accesses" value="0"/>
<stat name="memory_reads" value="431717"/>
<stat name="memory_writes" value="15026"/>
</component>
Please help
Best Regards
hussain
_______________________________________________
gem5-dev mailing list
[email protected]
http://m5sim.org/mailman/listinfo/gem5-dev
