changeset 913585a4189a in /z/repo/gem5
details: http://repo.gem5.org/gem5?cmd=changeset;node=913585a4189a
description:
util: Enable DRAM sweep to print power and efficiency
This patch enhances the functionality of the DRAM sweep script to not
only plot the bandwidth utilisation, but also total power and power
efficiency. To do so, a command-line switch is added, and a bit more
data extracted from the stats.
diffstat:
util/dram_sweep_plot.py | 84 +++++++++++++++++++++++++++++++++++++-----------
1 files changed, 64 insertions(+), 20 deletions(-)
diffs (124 lines):
diff -r e5744056cf76 -r 913585a4189a util/dram_sweep_plot.py
--- a/util/dram_sweep_plot.py Wed Aug 05 04:36:29 2015 -0400
+++ b/util/dram_sweep_plot.py Wed Aug 05 04:36:31 2015 -0400
@@ -57,18 +57,28 @@
# generated by the config/dram/sweep.py script
def main():
- if len(sys.argv) != 2:
- print "Usage: ", sys.argv[0], " <simout directory>"
+ if len(sys.argv) != 3:
+ print "Usage: ", sys.argv[0], "-u|p|e <simout directory>"
exit(-1)
+ if len(sys.argv[1]) != 2 or sys.argv[1][0] != '-' or \
+ not sys.argv[1][1] in "upe":
+ print "Choose -u (utilisation), -p (total power), or -e " \
+ "(power efficiency)"
+ exit(-1)
+
+ # Choose the appropriate mode, either utilisation, total power, or
+ # efficiency
+ mode = sys.argv[1][1]
+
try:
- stats = open(sys.argv[1] + '/stats.txt', 'r')
+ stats = open(sys.argv[2] + '/stats.txt', 'r')
except IOError:
print "Failed to open ", sys.argv[1] + '/stats.txt', " for reading"
exit(-1)
try:
- simout = open(sys.argv[1] + '/simout', 'r')
+ simout = open(sys.argv[2] + '/simout', 'r')
except IOError:
print "Failed to open ", sys.argv[1] + '/simout', " for reading"
exit(-1)
@@ -92,29 +102,57 @@
print "Failed to establish sweep details, ensure simout is up-to-date"
exit(-1)
+ # Now parse the stats
+ peak_bw = []
+ bus_util = []
+ avg_pwr = []
- # Collect the bus utilisation as our Z-axis, we do this in a 2D
+ for line in stats:
+ match = re.match(".*busUtil\s+(\d+\.\d+)\s+#.*", line)
+ if match:
+ bus_util.append(float(match.groups(0)[0]))
+
+ match = re.match(".*peakBW\s+(\d+\.\d+)\s+#.*", line)
+ if match:
+ peak_bw.append(float(match.groups(0)[0]))
+
+ match = re.match(".*averagePower\s+(\d+\.\d+)\s+#.*", line)
+ if match:
+ avg_pwr.append(float(match.groups(0)[0]))
+ stats.close()
+
+
+ # Sanity check
+ if not (len(peak_bw) == len(bus_util) and len(bus_util) == len(avg_pwr)):
+ print "Peak bandwidth, bus utilisation, and average power do not match"
+ exit(-1)
+
+ # Collect the selected metric as our Z-axis, we do this in a 2D
# grid corresponding to each iteration over the various stride
# sizes.
z = []
zs = []
i = 0
- # Now parse the stats
- for line in stats:
- match = re.match(".*busUtil\s+(\d+\.\d+)\s+#.*", line)
- if match:
- bus_util = float(match.groups(0)[0])
- z.append(bus_util)
- i += 1
- # If we have completed a sweep over the stride sizes,
- # start anew
- if i == max_size / burst_size:
- zs.append(z)
- z = []
- i = 0
+ for j in range(len(peak_bw)):
+ if mode == 'u':
+ z.append(bus_util[j])
+ elif mode == 'p':
+ z.append(avg_pwr[j])
+ elif mode == 'e':
+ # avg_pwr is in mW, peak_bw in MiByte/s, bus_util in percent
+ z.append(avg_pwr[j] / (bus_util[j] / 100.0 * peak_bw[j] / 1000.0))
+ else:
+ print "Unexpected mode %s" % mode
+ exit(-1)
- stats.close()
+ i += 1
+ # If we have completed a sweep over the stride sizes,
+ # start anew
+ if i == max_size / burst_size:
+ zs.append(z)
+ z = []
+ i = 0
# We should have a 2D grid with as many columns as banks
if len(zs) != banks:
@@ -140,7 +178,13 @@
ax.set_xlabel('Bytes per activate')
ax.set_ylabel('Banks')
- ax.set_zlabel('Efficiency (%)')
+
+ if mode == 'u':
+ ax.set_zlabel('Utilisation (%)')
+ elif mode == 'p':
+ ax.set_zlabel('Power (mW)')
+ elif mode == 'e':
+ ax.set_zlabel('Power efficiency (mW / GByte / s)')
# Add a colorbar
fig.colorbar(surf, shrink=0.5, pad=.1, aspect=10)
_______________________________________________
gem5-dev mailing list
[email protected]
http://m5sim.org/mailman/listinfo/gem5-dev
