Tiago Mück has uploaded this change for review. ( https://gem5-review.googlesource.com/c/public/gem5/+/18789

Change subject: mem: Parameterize coherent xbar sanity checks
......................................................................

mem: Parameterize coherent xbar sanity checks

Parameters can be used to change coherent xbar limits for the routing
table and outstanding snoops. We need the ability to tweak these values
as the current defaults may be violated in simulations with large core
counts.

Change-Id: Idb64b8c105683d02d8beba5bce13b815181ba824
Signed-off-by: Tiago Muck <[email protected]>
---
M src/mem/XBar.py
M src/mem/coherent_xbar.cc
M src/mem/coherent_xbar.hh
3 files changed, 31 insertions(+), 9 deletions(-)



diff --git a/src/mem/XBar.py b/src/mem/XBar.py
index 976a290..dab961f 100644
--- a/src/mem/XBar.py
+++ b/src/mem/XBar.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2012, 2015, 2017 ARM Limited
+# Copyright (c) 2012, 2015, 2017, 2019 ARM Limited
 # All rights reserved.
 #
 # The license below extends only to copyright in the software and shall
@@ -101,6 +101,12 @@
     # An optional snoop filter
     snoop_filter = Param.SnoopFilter(NULL, "Selected snoop filter")

+    # Maximum number of outstanding snoop requests for sanity checks
+ max_outstanding_snoops = Param.Int(512, "Max. outstanding snoops allowed")
+
+    # Maximum routing table size for sanity checks
+    max_routing_table_size = Param.Int(512, "Max. routing table size")
+
     # Determine how this crossbar handles packets where caches have
     # already committed to responding, by establishing if the crossbar
     # is the point of coherency or not.
diff --git a/src/mem/coherent_xbar.cc b/src/mem/coherent_xbar.cc
index 839d95b..74c93be 100644
--- a/src/mem/coherent_xbar.cc
+++ b/src/mem/coherent_xbar.cc
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011-2018 ARM Limited
+ * Copyright (c) 2011-2019 ARM Limited
  * All rights reserved
  *
  * The license below extends only to copyright in the software and shall
@@ -59,6 +59,8 @@
 CoherentXBar::CoherentXBar(const CoherentXBarParams *p)
     : BaseXBar(p), system(p->system), snoopFilter(p->snoop_filter),
       snoopResponseLatency(p->snoop_response_latency),
+      maxOutstandingSnoopCheck(p->max_outstanding_snoops),
+      maxRoutingTableSizeCheck(p->max_routing_table_size),
       pointOfCoherency(p->point_of_coherency),
       pointOfUnification(p->point_of_unification)
 {
@@ -325,8 +327,9 @@
                 outstandingSnoop.insert(pkt->req);

                 // basic sanity check on the outstanding snoops
-                panic_if(outstandingSnoop.size() > 512,
-                         "Outstanding snoop requests exceeded 512\n");
+ panic_if(outstandingSnoop.size() > maxOutstandingSnoopCheck,
+                         "%s: Outstanding snoop requests exceeded %d\n",
+                         name(), maxOutstandingSnoopCheck);
             }

             // remember where to route the normal response to
@@ -334,8 +337,9 @@
                 assert(routeTo.find(pkt->req) == routeTo.end());
                 routeTo[pkt->req] = slave_port_id;

-                panic_if(routeTo.size() > 512,
-                         "Routing table exceeds 512 packets\n");
+                panic_if(routeTo.size() > maxRoutingTableSizeCheck,
+                         "%s: Routing table exceeds %d packets\n",
+                         name(), maxRoutingTableSizeCheck);
             }

             // update the layer state and schedule an idle event
@@ -401,8 +405,9 @@
                 assert(routeTo.find(pkt->req) == routeTo.end());
                 routeTo[pkt->req] = slave_port_id;

-                panic_if(routeTo.size() > 512,
-                         "Routing table exceeds 512 packets\n");
+                panic_if(routeTo.size() > maxRoutingTableSizeCheck,
+                         "%s: Routing table exceeds %d packets\n",
+                         name(), maxRoutingTableSizeCheck);
             }
         }
     }
diff --git a/src/mem/coherent_xbar.hh b/src/mem/coherent_xbar.hh
index ff28cb7..386b479 100644
--- a/src/mem/coherent_xbar.hh
+++ b/src/mem/coherent_xbar.hh
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011-2015, 2017 ARM Limited
+ * Copyright (c) 2011-2015, 2017, 2019 ARM Limited
  * All rights reserved
  *
  * The license below extends only to copyright in the software and shall
@@ -278,8 +278,19 @@
       * broadcast needed for probes.  NULL denotes an absent filter. */
     SnoopFilter *snoopFilter;

+    /** Cycles of snoop response latency.*/
     const Cycles snoopResponseLatency;
+
+    /** Maximum number of outstading snoops sanity check*/
+    const unsigned int maxOutstandingSnoopCheck;
+
+    /** Maximum routing table size sanity check*/
+    const unsigned int maxRoutingTableSizeCheck;
+
+    /** Is this crossbar the point of coherency? **/
     const bool pointOfCoherency;
+
+    /** Is this crossbar the point of unification? **/
     const bool pointOfUnification;

     /**

--
To view, visit https://gem5-review.googlesource.com/c/public/gem5/+/18789
To unsubscribe, or for help writing mail filters, visit https://gem5-review.googlesource.com/settings

Gerrit-Project: public/gem5
Gerrit-Branch: master
Gerrit-Change-Id: Idb64b8c105683d02d8beba5bce13b815181ba824
Gerrit-Change-Number: 18789
Gerrit-PatchSet: 1
Gerrit-Owner: Tiago Mück <[email protected]>
Gerrit-MessageType: newchange
_______________________________________________
gem5-dev mailing list
[email protected]
http://m5sim.org/mailman/listinfo/gem5-dev

Reply via email to