Hi, I am currently doing a project in gem5. How to place a buffer in an NoC router? Regards
On Thu, 25 Mar 2021, 3:08 pm Giacomo Travaglini (Gerrit) via gem5-dev, < [email protected]> wrote: > Giacomo Travaglini *submitted* this change. > > View Change <https://gem5-review.googlesource.com/c/public/gem5/+/43288> > Approvals: Jason Lowe-Power: Looks good to me, approved; Looks good to me, > approved Bobby R. Bruce: Looks good to me, approved kokoro: Regressions > pass > > configs: RubySimpleSystem and simple ruby_fs.py script > > This patch is providing a minimal ruby powered script > for Arm simulations > > Change-Id: Ifb2d827362e2d5de5d15c70b200598f9f714f7f8 > Signed-off-by: Giacomo Travaglini <[email protected]> > Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43288 > Maintainer: Bobby R. Bruce <[email protected]> > Maintainer: Jason Lowe-Power <[email protected]> > Tested-by: kokoro <[email protected]> > Reviewed-by: Jason Lowe-Power <[email protected]> > --- > M configs/example/arm/devices.py > A configs/example/arm/ruby_fs.py > 2 files changed, 287 insertions(+), 0 deletions(-) > > diff --git a/configs/example/arm/devices.py b/configs/example/arm/devices.py > index a46663b..6574eef 100644 > --- a/configs/example/arm/devices.py > +++ b/configs/example/arm/devices.py > @@ -386,3 +386,26 @@ > > def attach_pci(self, dev): > self.realview.attachPciDevice(dev, self.iobus) > + > +class ArmRubySystem(BaseSimpleSystem): > + """ > + Meant to be used with ruby > + """ > + def __init__(self, mem_size, platform=None, **kwargs): > + super(ArmRubySystem, self).__init__(mem_size, platform, **kwargs) > + self._dma_ports = [] > + self._mem_ports = [] > + > + def connect(self): > + self.realview.attachOnChipIO(self.iobus, > + dma_ports=self._dma_ports, mem_ports=self._mem_ports) > + > + self.realview.attachIO(self.iobus, dma_ports=self._dma_ports) > + > + for cluster in self._clusters: > + for i, cpu in enumerate(cluster.cpus): > + self.ruby._cpu_ports[i].connectCpuPorts(cpu) > + > + def attach_pci(self, dev): > + self.realview.attachPciDevice(dev, self.iobus, > + dma_ports=self._dma_ports) > diff --git a/configs/example/arm/ruby_fs.py b/configs/example/arm/ruby_fs.py > new file mode 100644 > index 0000000..24f2097 > --- /dev/null > +++ b/configs/example/arm/ruby_fs.py > @@ -0,0 +1,264 @@ > +# Copyright (c) 2016-2017, 2020-2021 Arm Limited > +# All rights reserved. > +# > +# The license below extends only to copyright in the software and shall > +# not be construed as granting a license to any other intellectual > +# property including but not limited to intellectual property relating > +# to a hardware implementation of the functionality of the software > +# licensed hereunder. You may use the software subject to the license > +# terms below provided that you ensure that this notice is replicated > +# unmodified and in its entirety in all distributions of the software, > +# modified or unmodified, in source code or in binary form. > +# > +# Redistribution and use in source and binary forms, with or without > +# modification, are permitted provided that the following conditions are > +# met: redistributions of source code must retain the above copyright > +# notice, this list of conditions and the following disclaimer; > +# redistributions in binary form must reproduce the above copyright > +# notice, this list of conditions and the following disclaimer in the > +# documentation and/or other materials provided with the distribution; > +# neither the name of the copyright holders nor the names of its > +# contributors may be used to endorse or promote products derived from > +# this software without specific prior written permission. > +# > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS > +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR > +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT > +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, > +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT > +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, > +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY > +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE > +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > + > +import os > +import m5 > +from m5.util import addToPath > +from m5.objects import * > +from m5.options import * > +import optparse > + > +m5.util.addToPath('../..') > + > +from common import MemConfig > +from common import ObjectList > +from common import Options > +from common import SysPaths > +from common.cores.arm import HPI > +from ruby import Ruby > + > +import devices > + > + > +default_kernel = 'vmlinux.arm64' > +default_disk = 'linaro-minimal-aarch64.img' > +default_root_device = '/dev/vda1' > + > + > +# Pre-defined CPU configurations. Each tuple must be ordered as : (cpu_class, > +# l1_icache_class, l1_dcache_class, walk_cache_class, l2_Cache_class). Any of > +# the cache class may be 'None' if the particular cache is not present. > +cpu_types = { > + > + "noncaching" : ( NonCachingSimpleCPU, None, None, None, None), > + "minor" : (MinorCPU, > + devices.L1I, devices.L1D, > + devices.WalkCache, > + devices.L2), > + "hpi" : ( HPI.HPI, > + HPI.HPI_ICache, HPI.HPI_DCache, > + HPI.HPI_WalkCache, > + HPI.HPI_L2) > +} > + > +def create_cow_image(name): > + """Helper function to create a Copy-on-Write disk image""" > + image = CowDiskImage() > + image.child.image_file = SysPaths.disk(name) > + > + return image > + > +def config_ruby(system, options): > + cpus = [] > + for cluster in system.cpu_cluster: > + for cpu in cluster.cpus: > + cpus.append(cpu) > + > + Ruby.create_system(options, True, system, system.iobus, > + system._dma_ports, system.realview.bootmem, > + cpus) > + > + # Create a seperate clock domain for Ruby > + system.ruby.clk_domain = SrcClockDomain( > + clock = options.ruby_clock, > + voltage_domain = system.voltage_domain) > + > +def create(args): > + ''' Create and configure the system object. ''' > + > + if args.script and not os.path.isfile(args.script): > + print("Error: Bootscript %s does not exist" % args.script) > + sys.exit(1) > + > + cpu_class = cpu_types[args.cpu][0] > + mem_mode = cpu_class.memory_mode() > + > + system = devices.ArmRubySystem(args.mem_size, > + mem_mode=mem_mode, > + workload=ArmFsLinux( > + object_file= > + SysPaths.binary(args.kernel)), > + readfile=args.script) > + > + # Add CPU clusters to the system > + system.cpu_cluster = [ > + devices.CpuCluster(system, > + args.num_cpus, > + args.cpu_freq, "1.0V", > + *cpu_types[args.cpu]), > + ] > + > + # Add the PCI devices we need for this system. The base system > + # doesn't have any PCI devices by default since they are assumed > + # to be added by the configuration scripts needing them. > + system.pci_devices = [ > + # Create a VirtIO block device for the system's boot > + # disk. Attach the disk image using gem5's Copy-on-Write > + # functionality to avoid writing changes to the stored copy of > + # the disk image. > + PciVirtIO(vio=VirtIOBlock(image=create_cow_image(args.disk_image))), > + ] > + > + # Attach the PCI devices to the system. The helper method in the > + # system assigns a unique PCI bus ID to each of the devices and > + # connects them to the IO bus. > + for dev in system.pci_devices: > + system.attach_pci(dev) > + > + config_ruby(system, args) > + > + # Wire up the system's memory system > + system.connect() > + > + # Setup gem5's minimal Linux boot loader. > + system.realview.setupBootLoader(system, SysPaths.binary) > + > + if args.dtb: > + system.workload.dtb_filename = args.dtb > + else: > + # No DTB specified: autogenerate DTB > + system.workload.dtb_filename = \ > + os.path.join(m5.options.outdir, 'system.dtb') > + system.generateDtb(system.workload.dtb_filename) > + > + # Linux boot command flags > + kernel_cmd = [ > + # Tell Linux to use the simulated serial port as a console > + "console=ttyAMA0", > + # Hard-code timi > + "lpj=19988480", > + # Disable address space randomisation to get a consistent > + # memory layout. > + "norandmaps", > + # Tell Linux where to find the root disk image. > + "root=%s" % args.root_device, > + # Mount the root disk read-write by default. > + "rw", > + # Tell Linux about the amount of physical memory present. > + "mem=%s" % args.mem_size, > + ] > + system.workload.command_line = " ".join(kernel_cmd) > + > + return system > + > + > +def run(args): > + cptdir = m5.options.outdir > + if args.checkpoint: > + print("Checkpoint directory: %s" % cptdir) > + > + while True: > + event = m5.simulate() > + exit_msg = event.getCause() > + if exit_msg == "checkpoint": > + print("Dropping checkpoint at tick %d" % m5.curTick()) > + cpt_dir = os.path.join(m5.options.outdir, "cpt.%d" % > m5.curTick()) > + m5.checkpoint(os.path.join(cpt_dir)) > + print("Checkpoint done.") > + else: > + print(exit_msg, " @ ", m5.curTick()) > + break > + > + sys.exit(event.getCode()) > + > + > +def main(): > + parser = optparse.OptionParser() > + > + parser.add_option("--dtb", type=str, default=None, > + help="DTB file to load") > + parser.add_option("--kernel", type=str, default=default_kernel, > + help="Linux kernel") > + parser.add_option("--disk-image", type=str, > + default=default_disk, > + help="Disk to instantiate") > + parser.add_option("--root-device", type=str, > + default=default_root_device, > + help="OS device name for root partition (default: {})" > + .format(default_root_device)) > + parser.add_option("--script", type=str, default="", > + help = "Linux bootscript") > + parser.add_option("--cpu", type="choice", choices=list(cpu_types.keys()), > + default="minor", > + help="CPU model to use") > + parser.add_option("--cpu-freq", type=str, default="4GHz") > + parser.add_option("-n", "--num-cpus", type="int", default=1) > + parser.add_option("--checkpoint", action="store_true") > + parser.add_option("--restore", type=str, default=None) > + > + parser.add_option("--mem-type", type="choice", default="DDR3_1600_8x8", > + choices=ObjectList.mem_list.get_names(), > + help = "type of memory to use") > + parser.add_option("--mem-channels", type="int", default=1, > + help = "number of memory channels") > + parser.add_option("--mem-ranks", type="int", default=None, > + help = "number of memory ranks per channel") > + parser.add_option("--mem-size", action="store", type="string", > + default="2GiB", > + help="Specify the physical memory size (single > memory)") > + parser.add_option("--enable-dram-powerdown", action="store_true", > + help="Enable low-power states in DRAMInterface") > + parser.add_option("--mem-channels-intlv", type="int", default=0, > + help="Memory channels interleave") > + > + parser.add_option("--num-dirs", type="int", default=1) > + parser.add_option("--num-l2caches", type="int", default=1) > + parser.add_option("--num-l3caches", type="int", default=1) > + parser.add_option("--l1d_size", type="string", default="64kB") > + parser.add_option("--l1i_size", type="string", default="32kB") > + parser.add_option("--l2_size", type="string", default="2MB") > + parser.add_option("--l3_size", type="string", default="16MB") > + parser.add_option("--l1d_assoc", type="int", default=2) > + parser.add_option("--l1i_assoc", type="int", default=2) > + parser.add_option("--l2_assoc", type="int", default=8) > + parser.add_option("--l3_assoc", type="int", default=16) > + parser.add_option("--cacheline_size", type="int", default=64) > + > + Ruby.define_options(parser) > + (options, args) = parser.parse_args() > + > + root = Root(full_system=True) > + root.system = create(options) > + > + if options.restore is not None: > + m5.instantiate(options.restore) > + else: > + m5.instantiate() > + > + run(options) > + > + > +if __name__ == "__m5_main__": > + main() > > To view, visit change 43288 > <https://gem5-review.googlesource.com/c/public/gem5/+/43288>. To > unsubscribe, or for help writing mail filters, visit settings > <https://gem5-review.googlesource.com/settings>. > Gerrit-Project: public/gem5 > Gerrit-Branch: develop > Gerrit-Change-Id: Ifb2d827362e2d5de5d15c70b200598f9f714f7f8 > Gerrit-Change-Number: 43288 > Gerrit-PatchSet: 5 > Gerrit-Owner: Giacomo Travaglini <[email protected]> > Gerrit-Reviewer: Andreas Sandberg <[email protected]> > Gerrit-Reviewer: Bobby R. Bruce <[email protected]> > Gerrit-Reviewer: Giacomo Travaglini <[email protected]> > Gerrit-Reviewer: Jason Lowe-Power <[email protected]> > Gerrit-Reviewer: Jason Lowe-Power <[email protected]> > Gerrit-Reviewer: Nikos Nikoleris <[email protected]> > Gerrit-Reviewer: Richard Cooper <[email protected]> > Gerrit-Reviewer: kokoro <[email protected]> > Gerrit-CC: Tiago Mück <[email protected]> > Gerrit-MessageType: merged > _______________________________________________ > gem5-dev mailing list -- [email protected] > To unsubscribe send an email to [email protected] > %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
_______________________________________________ gem5-dev mailing list -- [email protected] To unsubscribe send an email to [email protected] %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
