Kaustav Goswami has uploaded this change for review. (
https://gem5-review.googlesource.com/c/public/gem5/+/53165 )
Change subject: stdlib,configs: Config added for SPEC CPU2006 using stdlib.
......................................................................
stdlib,configs: Config added for SPEC CPU2006 using stdlib.
This change adds a config file to execute SPEC CPU 2006 benchmarks
using gem5 stdlib. Also, it adds a new test for the same.
Signed-off-by: Kaustav Goswami <[email protected]>
Change-Id: I4287433717e4a3d05136b27554accd577275e1be
---
A configs/example/gem5_library/x86-spec-cpu2006-benchmarks.py
M tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
2 files changed, 392 insertions(+), 0 deletions(-)
diff --git a/configs/example/gem5_library/x86-spec-cpu2006-benchmarks.py
b/configs/example/gem5_library/x86-spec-cpu2006-benchmarks.py
new file mode 100644
index 0000000..7b6726a
--- /dev/null
+++ b/configs/example/gem5_library/x86-spec-cpu2006-benchmarks.py
@@ -0,0 +1,358 @@
+# Copyright (c) 2021 The Regents of the University of California.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+Script to run SPEC CPU2006 benchmarks with gem5.
+The script expects a benchmark program name and the simulation
+size. The system is fixed with 2 CPU cores, MESI Two Level system
+cache and 3 GB DDR4 memory. It uses the x86 board.
+
+This script will count the total number of instructions executed
+in the ROI. It also tracks how much wallclock and simulated time.
+
+Usage:
+------
+
+```
+scons build/X86_MESI_Two_Level/gem5.opt
+./build/X86_MESI_Two_Level/gem5.opt \
+ configs/example/gem5_library/x86-spec-cpu2006-benchmarks.py \
+ --benchmark <benchmark_name> \
+ --size <simulation_size>
+```
+
+"""
+
+import argparse
+import time
+import os
+import json
+
+import m5
+from m5.objects import Root
+
+from gem5.utils.requires import requires
+from gem5.components.boards.x86_board import X86Board
+from gem5.components.memory.single_channel import SingleChannelDDR4_2400
+from gem5.components.processors.simple_switchable_processor import(
+ SimpleSwitchableProcessor,
+)
+from gem5.components.processors.cpu_types import CPUTypes
+from gem5.isas import ISA
+from gem5.coherence_protocol import CoherenceProtocol
+from gem5.resources.resource import Resource, CustomResource
+
+from m5.stats.gem5stats import get_simstat
+
+# We check for the required gem5 build.
+
+requires(
+ isa_required = ISA.X86,
+ coherence_protocol_required=CoherenceProtocol.MESI_TWO_LEVEL,
+ kvm_required=True,
+)
+
+# We now check for the spec-2006 disk image, which should be placed
+# in ~/.cache/gem5 directory
+
+if not os.path.exists(\
+ os.path.join(os.path.expanduser('~'),".cache/gem5/spec-2006")
+):
+ print("fatal: The spec-disk image should be placed in ~/.cache/gem5/")
+ print("Instructions on building the disk image can be found at: ")
+ print(
+ "https://gem5art.readthedocs.io/en/latest/tutorials/spec-tutorial.html";
+ )
+ exit(-1)
+
+# Following are the list of benchmark programs for SPEC CPU2006.
+# Note that 400.perlbench, 447.dealII, 450.soplex and 483.xalancbmk
+# have build errors, and, therefore cannot be executed. More information is
+# available at: https://www.gem5.org/documentation/benchmark_status/gem5-20
+
+benchmark_choices = ['400.perlbench', '401.bzip2', '403.gcc', '410.bwaves',
+ '416.gamess', '429.mcf', '433.milc', '435.gromacs',
+ '436.cactusADM', '437.leslie3d', '444.namd', '445.gobmk',
+ '447.dealII', '450.soplex', '453.povray', '454.calculix',
+ '456.hmmer', '458.sjeng', '459.GemsFDTD',
+ '462.libquantum', '464.h264ref', '465.tonto', '470.lbm',
+ '471.omnetpp', '473.astar', '481.wrf', '482.sphinx3',
+ '483.xalancbmk', '998.specrand', '999.specrand']
+
+# Following are the input size.
+
+size_choices = ["test", "train", "ref"]
+
+parser = argparse.ArgumentParser(
+ description="An example configuration script to run the \
+ SPEC CPU2006 benchmarks."
+)
+
+# The arguments accepted are: a. benchmark name, and, b. simulation size
+
+parser.add_argument(
+ "--benchmark",
+ type = str,
+ required=True,
+ help = "Input the benchmark program to execute.",
+ choices=benchmark_choices,
+)
+
+parser.add_argument(
+ "--size",
+ type = str,
+ required=True,
+ help = "Sumulation size the benchmark program.",
+ choices = size_choices,
+)
+
+args = parser.parse_args()
+
+# Setting up all the fixed system parameters here
+# Caches: MESI Two Level Cache Hierarchy
+
+from gem5.components.cachehierarchies.ruby.\
+ mesi_two_level_cache_hierarchy import(
+ MESITwoLevelCacheHierarchy,
+)
+
+cache_hierarchy = MESITwoLevelCacheHierarchy(
+ l1d_size = "32kB",
+ l1d_assoc = 8,
+ l1i_size="32kB",
+ l1i_assoc=8,
+ l2_size="256kB",
+ l2_assoc=16,
+ num_l2_banks=2,
+)
+# Memory: Single Channel DDR4 2400 DRAM device.
+# The X86 board only supports 3 GB of main memory.
+# We will replace single channel memory in the future.
+# Right now, multichannel memories does not work properly
+# with the x86 I/O hole.
+
+memory = SingleChannelDDR4_2400(size = "3GB")
+
+# Here we setup the processor. This is a special switchable processor in
which
+# a starting core type and a switch core type must be specified. Once a
+# configuration is instantiated a user may call `processor.switch()` to
switch
+# from the starting core types to the switch core types. In this simulation
+# we start with KVM cores to simulate the OS boot, then switch to the
Timing
+# cores for the command we wish to run after boot.
+
+processor = SimpleSwitchableProcessor(
+ starting_core_type=CPUTypes.KVM,
+ switch_core_type=CPUTypes.TIMING,
+ num_cores=2,
+)
+
+# Here we setup the board. The X86Board allows for Full-System X86
simulations
+
+board = X86Board(
+ clk_freq="3GHz",
+ processor=processor,
+ memory=memory,
+ cache_hierarchy=cache_hierarchy,
+)
+
+# SPEC CPU2006 benchmarks output placed in /home/gem5/spec2006/results
+# directory on the disk-image. The following folder is created in the
+# m5.options.outdir and the output from the disk-image folder is copied to
+# this folder.
+
+output_dir = "speclogs_" + ''.join(x.strip() for x in
time.asctime().split())
+output_dir = output_dir.replace(":","")
+
+# We create this folder if it is absent.
+try:
+ os.makedirs(os.path.join(m5.options.outdir, output_dir))
+except FileExistsError:
+ print("warn: output directory already exists!")
+
+# Here we set the FS workload, i.e., SPEC CPU2006 benchmark
+# After simulation has ended you may inspect
+# `m5out/system.pc.com_1.device` to the stdout, if any.
+
+# After the system boots, we execute the benchmark program and wait till
the
+# `m5_exit instruction encountered` is encountered. We start collecting
+# the number of committed instructions till ROI ends (marked by another
+# `m5_exit instruction encountered`). We then start copying the output
logs,
+# present in the /home/gem5/spec2006/results directory to the `output_dir`.
+
+# The runscript.sh file places `m5 exit` before and after the following
command
+# Therefore, we only pass this command without m5 exit.
+
+command = "{} {} {}".format(args.benchmark, args.size, output_dir)
+
+# For enabling CustomResource, we pass an additional parameter to mount the
+# correct partition.
+
+metadata = {
+ "additional_metadata" : {
+ "root_partition" : "1",
+ },
+}
+
+board.set_kernel_disk_workload(
+ # The x86 linux kernel will be automatically downloaded to the
+ # `~/.cache/gem5` directory if not already present.
+ # SPEC CPU2006 benchamarks were tested with kernel version 4.19.83 and
+ # 5.4.49
+ kernel=Resource(
+ "x86-linux-kernel-4.19.83",
+ ),
+ # The x86 SPEC CPU 2006 disk image is expected to be present in the
+ # `~/.cache/gem5` directory.
+ disk_image=CustomResource(
+ os.path.join(
+ os.path.expanduser("~"),".cache/gem5/spec-2006"
+ ),
+ metadata=metadata
+ ),
+ readfile_contents=command,
+)
+
+# We need this for long running processes.
+m5.disableAllListeners()
+
+root = Root(full_system = True, system = board)
+
+# sim_quantum must be set when KVM cores are used.
+
+root.sim_quantum = int(1e9)
+
+m5.instantiate()
+
+# We maintain the wall clock time.
+
+globalStart = time.time()
+
+print("Running the simulation")
+print("Using KVM cpu")
+
+start_tick = m5.curTick()
+end_tick = m5.curTick()
+m5.stats.reset()
+
+exit_event = m5.simulate()
+
+if exit_event.getCause() == "m5_exit instruction encountered":
+ # We have completed booting the OS using KVM cpu
+ # Reached the start of ROI
+
+ print("Done booting Linux")
+ print("Resetting stats at the start of ROI!")
+
+ m5.stats.reset()
+ start_tick = m5.curTick()
+
+ # We switch to timing cpu for detailed simulation.
+
+ processor.switch()
+else:
+ # `m5_exit instruction encountered` was never reached
+
+ print("Unexpected termination of simulation before ROI was reached!")
+ print(
+ "Exiting @ tick {} because {}.".format(
+ m5.curTick(),
+ exit_event.getCause()
+ )
+ )
+ exit(-1)
+
+# Simulate the ROI
+exit_event = m5.simulate()
+
+# Reached the end of ROI
+gem5stats = get_simstat(root)
+
+# We get the number of committed instructions from the timing
+# cores. We then sum and print them at the end.
+
+roi_insts = float(\
+ json.loads(gem5stats.dumps())\
+ ["system"]["processor"]["cores2"]["core"]["exec_context.thread_0"]\
+ ["numInsts"]["value"]) + float(\
+ json.loads(gem5stats.dumps())\
+ ["system"]["processor"]["cores3"]["core"]["exec_context.thread_0"]\
+ ["numInsts"]["value"]\
+)
+
+if exit_event.getCause() == "m5_exit instruction encountered":
+ print("Dump stats at the end of the ROI!")
+ m5.stats.dump()
+ end_tick = m5.curTick()
+ m5.stats.reset()
+
+else:
+ # `m5_exit instruction encountered` was never reached
+
+ print("Unexpected termination of simulation while ROI was being
executed!")
+ print(
+ "Exiting @ tick {} because {}.".format(
+ m5.curTick(),
+ exit_event.getCause()
+ )
+ )
+ exit(-1)
+
+# We need to copy back the contents of the `speclogs' directory to
+# m5.options.outdir
+
+exit_event = m5.simulate()
+
+if exit_event.getCause() == "m5_exit instruction encountered":
+ print("Output logs copied!")
+
+else:
+ print("Unexpected termination of simulation while copying speclogs!")
+ print(
+ "Exiting @ tick {} because {}.".format(
+ m5.curTick(),
+ exit_event.getCause()
+ )
+ )
+ exit(-1)
+
+m5.stats.dump()
+end_tick = m5.curTick()
+m5.stats.reset()
+
+# Simulation is over at this point. We acknowledge that all the simulation
+# events were successful.
+print("All simulation events were successful.")
+# We print the final simulation statistics.
+
+print("Performance statistics:")
+
+print("Simulated time: %.2fs" % ((end_tick-start_tick)/1e12))
+print("Instructions executed: %d" % ((roi_insts)))
+print("Ran a total of", m5.curTick()/1e12, "simulated seconds")
+print("Total wallclock time: %.2fs, %.2f min" % \
+ (time.time()-globalStart, (time.time()-globalStart)/60))
+exit(0)
+
diff --git
a/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
b/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
index abe0cbd..d1da415 100644
--- a/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
+++ b/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
@@ -136,6 +136,27 @@
length=constants.long_tag,
)
+if os.access("/dev/kvm", mode=os.R_OK | os.W_OK):
+ # The x86-ubuntu-run uses KVM cores, this test will therefore only be
run
+ # on systems that support KVM.
+ gem5_verify_config(
+ name="test-gem5-library-example-x86-spec-cpu2006-benchmarks",
+ fixtures=(),
+ verifiers=(),
+ config=joinpath(
+ config.base_dir,
+ "configs",
+ "example",
+ "gem5_library",
+ "x86-spec-cpu2006-benchmarks.py",
+ ),
+ config_args=["--benchmark","510.bwaves","--size","test"],
+ valid_isas=(constants.x86_tag,),
+ protocol="MESI_Two_Level",
+ valid_hosts=constants.supported_hosts,
+ length=constants.long_tag,
+ )
+
gem5_verify_config(
name="test-gem5-library-example-riscv-ubuntu-run",
fixtures=(),
--
To view, visit https://gem5-review.googlesource.com/c/public/gem5/+/53165
To unsubscribe, or for help writing mail filters, visit
https://gem5-review.googlesource.com/settings
Gerrit-Project: public/gem5
Gerrit-Branch: develop
Gerrit-Change-Id: I4287433717e4a3d05136b27554accd577275e1be
Gerrit-Change-Number: 53165
Gerrit-PatchSet: 1
Gerrit-Owner: Kaustav Goswami <[email protected]>
Gerrit-MessageType: newchange
_______________________________________________
gem5-dev mailing list -- [email protected]
To unsubscribe send an email to [email protected]
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
