Thank you. I will try it. On Wed, May 30, 2012 at 10:31 PM, mihai pricopi <[email protected]>wrote:
> I think the system is still running, try to connect using m5term 3457 > from another terminal. > > > On Thu, May 31, 2012 at 10:18 AM, Bojun Ma <[email protected]> wrote: > > Hi All, > > I ran gem5 in ARM FS mode with the disk image and kernel download > form > > the gem5 download page, but it seems freeze after a while like this: > > > > command line: build/ARM/gem5.opt configs/example/fs.py -n 4 > > Global frequency set at 1000000000000 ticks per second > > info: kernel located at: /dist/binaries/vmlinux.arm.smp.fb.2.6.38.8 > > Listening for system connection on port 5902 > > Listening for system connection on port 3457 > > 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7001 > > 0: system.remote_gdb.listener: listening for remote gdb #1 on port 7002 > > 0: system.remote_gdb.listener: listening for remote gdb #2 on port 7003 > > 0: system.remote_gdb.listener: listening for remote gdb #3 on port 7004 > > info: Using bootloader at address 0x80000000 > > **** REAL SIMULATION **** > > info: Entering event queue @ 0. Starting simulation... > > warn: The clidr register always reports 0 caches. > > warn: clidr LoUIS field of 0b001 to match current ARM implementations. > > warn: The csselr register isn't implemented. > > warn: The ccsidr register isn't implemented and always reads as 0. > > warn: instruction 'mcr bpiallis' unimplemented > > warn: instruction 'mcr icialluis' unimplemented > > warn: instruction 'mcr dccimvac' unimplemented > > warn: instruction 'mcr dccmvau' unimplemented > > warn: instruction 'mcr icimvau' unimplemented > > warn: instruction 'mcr bpiallis' unimplemented > > warn: LCD dual screen mode not supported > > warn: Returning thumbEE disabled for now since we don't support > CP14config > > registers and jumping to ThumbEE vectors > > warn: instruction 'mcr icialluis' unimplemented > > warn: instruction 'mcr icialluis' unimplemented > > > > > > Does anyone have ideas why it happens? Do I miss something in build and > > running? > > Thanks in advance. > > > > Bojun Ma > > -------------------------------------------------------------- > > M.S. Candidate > > Electrical and Computer Engineering > > Michigan Technological University > > > > > > > > > > > > _______________________________________________ > > gem5-users mailing list > > [email protected] > > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users >
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
