Hi Andreas,

I managed to get the actual data using commMonitor. However, instead of
32-bit it gives me 8-bit data. Since the data is 32-bit instruction this
8-bit am getting is not sufficient enough. do you have any idea how I can
extract the full 32-bit data. is it multi-cycle or I can extract them in a
single cycle.

Thanks,
Anteneh

On Sun, Nov 16, 2014 at 12:15 PM, Anteneh Bogale Gebregiorgis <
[email protected]> wrote:

> Hi Andreas,
>
> As per your recommendation I analyze the packet.proto and I found that
> commMonitor is tracing the address, size, tick and flags but not the data.
> I tried to add a data field to the trace but packet doesn't have a
> getdata() method that allows access to its private pointer data. can you
> give me some clue on adding a pointer filed to trace?
>
> Anteneh
>
>
> On Fri, Nov 14, 2014 at 3:41 PM, Andreas Hansson <[email protected]>
> wrote:
>
>>  Hi Anteneh,
>>
>>  The ASCII converted only outputs a small subset of the information
>> stored in the trace. Have a look at src/proto/packet.proto.
>>
>>  There is currently no PC captured (as a lot of packets would not have
>> this information), but there is a pkt_id field that is currently not used
>> by the CommMonitor. You could always add a field to the trace…
>>
>>  Andreas
>>
>>   From: Anteneh Bogale Gebregiorgis via gem5-users <[email protected]>
>> Reply-To: Anteneh Bogale Gebregiorgis <[email protected]>, gem5 users
>> mailing list <[email protected]>
>> Date: Friday, 14 November 2014 14:36
>> To: "[email protected]" <[email protected]>
>> Subject: [gem5-users] Cache trace using communication monitor
>> (commMonitor)
>>
>>  Dear all,
>>
>> I want to trace the instructions written to instruction cache. I added
>> commMonitor between the instruction cache and memory by modifying
>> CacheConfig.py as:
>>
>> system.icachemonitor =
>> CommMonitor(trace_file='ICache_content.ptrc',trace_enable=True)
>>         icache.mem_side = system.icachemonitor.slave
>>         system.icachemonitor.master = system.membus.slave
>> I got the protoc file and I decode it using the decode script in util
>> directory. the decoded file looks like:
>>
>> r,27840,64,768,912132500
>> r,18304,64,768,912189500
>> r,8302400,64,256,912260500
>> r,8302464,64,256,912438000
>> r,8302528,64,256,936300000
>> r,8302592,64,256,936383000
>>
>> the question is how to identify the instructions from this file?
>> or is there another way of obtaining the the trace without using
>> commMonitor?
>>
>> Thanks,
>> Anteneh
>>
>> -- IMPORTANT NOTICE: The contents of this email and any attachments are
>> confidential and may also be privileged. If you are not the intended
>> recipient, please notify the sender immediately and do not disclose the
>> contents to any other person, use it for any purpose, or store or copy the
>> information in any medium. Thank you.
>>
>> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
>> Registered in England & Wales, Company No: 2557590
>> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
>> Registered in England & Wales, Company No: 2548782
>>
>
>
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to