Hi Andreas, Thanks for the help now I get the required data. is it possible to set some flag that indicates commMonitor to write to file. since I am running FS mode commMonitor starts tracing before benchmark starts running and I want to start tracing only when the benchmark is running.
Thanks, Anteneh On Tue, Nov 18, 2014 at 1:15 PM, Andreas Hansson <[email protected]> wrote: > Hi Anteneh, > > I am not sure I understand. The data in a normal packet will be 64 bytes > (a cache line). You can check if a packet has payload through hasData, and > then use get() along with getSize to memcpy it into a ProtoMessage field of > variable length. > > Andreas > > From: Anteneh Bogale Gebregiorgis <[email protected]> > Date: Tuesday, November 18, 2014 at 9:16 AM > To: Andreas Hansson <[email protected]>, "[email protected]" < > [email protected]> > Subject: Re: [gem5-users] Cache trace using communication monitor > (commMonitor) > > Hi Andreas, > > I managed to get the actual data using commMonitor. However, instead of > 32-bit it gives me 8-bit data. Since the data is 32-bit instruction this > 8-bit am getting is not sufficient enough. do you have any idea how I can > extract the full 32-bit data. is it multi-cycle or I can extract them in a > single cycle. > > Thanks, > Anteneh > > On Sun, Nov 16, 2014 at 12:15 PM, Anteneh Bogale Gebregiorgis < > [email protected]> wrote: > >> Hi Andreas, >> >> As per your recommendation I analyze the packet.proto and I found that >> commMonitor is tracing the address, size, tick and flags but not the data. >> I tried to add a data field to the trace but packet doesn't have a >> getdata() method that allows access to its private pointer data. can you >> give me some clue on adding a pointer filed to trace? >> >> Anteneh >> >> >> On Fri, Nov 14, 2014 at 3:41 PM, Andreas Hansson <[email protected] >> > wrote: >> >>> Hi Anteneh, >>> >>> The ASCII converted only outputs a small subset of the information >>> stored in the trace. Have a look at src/proto/packet.proto. >>> >>> There is currently no PC captured (as a lot of packets would not have >>> this information), but there is a pkt_id field that is currently not used >>> by the CommMonitor. You could always add a field to the trace⦠>>> >>> Andreas >>> >>> From: Anteneh Bogale Gebregiorgis via gem5-users <[email protected]> >>> Reply-To: Anteneh Bogale Gebregiorgis <[email protected]>, gem5 >>> users mailing list <[email protected]> >>> Date: Friday, 14 November 2014 14:36 >>> To: "[email protected]" <[email protected]> >>> Subject: [gem5-users] Cache trace using communication monitor >>> (commMonitor) >>> >>> Dear all, >>> >>> I want to trace the instructions written to instruction cache. I added >>> commMonitor between the instruction cache and memory by modifying >>> CacheConfig.py as: >>> >>> system.icachemonitor = >>> CommMonitor(trace_file='ICache_content.ptrc',trace_enable=True) >>> icache.mem_side = system.icachemonitor.slave >>> system.icachemonitor.master = system.membus.slave >>> I got the protoc file and I decode it using the decode script in util >>> directory. the decoded file looks like: >>> >>> r,27840,64,768,912132500 >>> r,18304,64,768,912189500 >>> r,8302400,64,256,912260500 >>> r,8302464,64,256,912438000 >>> r,8302528,64,256,936300000 >>> r,8302592,64,256,936383000 >>> >>> the question is how to identify the instructions from this file? >>> or is there another way of obtaining the the trace without using >>> commMonitor? >>> >>> Thanks, >>> Anteneh >>> >>> -- IMPORTANT NOTICE: The contents of this email and any attachments are >>> confidential and may also be privileged. If you are not the intended >>> recipient, please notify the sender immediately and do not disclose the >>> contents to any other person, use it for any purpose, or store or copy the >>> information in any medium. Thank you. >>> >>> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >>> Registered in England & Wales, Company No: 2557590 >>> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 >>> 9NJ, Registered in England & Wales, Company No: 2548782 >>> >> >> > > -- IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > > ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2557590 > ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2548782 >
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
