Hello, How many (I mean, up to) cores did you try to simulate over this right kernel?
Thank you! Matheus Alcântara Souza > Em 24/11/2014, às 22:07, Christian List via gem5-users <[email protected]> > escreveu: > > Hello Andreas > Thank you for your fast response! I really thought those warnings were > corelated somehow. :) > > I found out that the second warning was caused by a wrong kernel image, which > I accidentally had used for the parsec benchmark ( shame on me :) ). So now > everything works fine. > > Best regards, > Chris > > > > > > > 2014-11-24 18:01 GMT+01:00 Andreas Hansson <[email protected]>: >> Hi Chris, >> >> The first warning is not related to the others. >> >> The warning around 8192 MB is because the default DRAM controller config is >> a single channel, dual rank, with 8 x8 4 Gbit devices (amounting to 1 x 2 x >> 8 x 512 MB). This is different from the physical memory specific on the >> command line (or default, of 512 MB) as seen by the OS. Note that this only >> really starts to matter if you care about DRAM power modelling. >> >> When it comes to the other issues that sounds more alarming. Perhaps it is >> worth reposing with some more details. >> >> Andreas >> >> From: Christian List via gem5-users <[email protected]> >> Reply-To: Christian List <[email protected]>, gem5 users mailing list >> <[email protected]> >> Date: Monday, 24 November 2014 16:40 >> To: "[email protected]" <[email protected]> >> Subject: [gem5-users] Adress and Dram warnings >> >> Hello, >> im running gem5 on my laptop. Today I wanted to install it on my home PC >> with the same settings. >> >> At execution I get: >> "warn: DRAM device capacity (8192 MB) does not match the adrdress range >> assigned (512 MB) >> >> In the options.py the standart memory is defined with 512 MB, but where >> comes the DRAM device capacity comes from ? :) and how can I overcome this >> warning ? >> >> The second warning is related to the first: >> "warn: Adress 0xfffffc0 is outside of physical memory, stopping fetch. >> >> I think those warnings brings me also some pagefault stats at the end of the >> output. >> >> I dont unterstand what i am missing :) >> >> Best regards >> Chris >> >> >> >> -- IMPORTANT NOTICE: The contents of this email and any attachments are >> confidential and may also be privileged. If you are not the intended >> recipient, please notify the sender immediately and do not disclose the >> contents to any other person, use it for any purpose, or store or copy the >> information in any medium. Thank you. >> >> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >> Registered in England & Wales, Company No: 2557590 >> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >> Registered in England & Wales, Company No: 2548782 > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
