> Hi, I am facing ditto same issue. It's been more than 12 hours but still the terminal is outputting the following and seems to be stuck in a loop.
It started at:- sh: can't access tty; job control turned off # <6>request_suspend_state: wakeup (3->0) at 2677791448 (1970-01-01 00:00:02.668103510 UTC) [ 2.689682] request_suspend_state: wakeup (3->0) at 2677791448 (1970-01- 01 00:00:02.668103510 UTC) <3>init: untracked pid 633 exited [ 2.690131] init: untracked pid 633 exited and this thing is going on in a loop:- <6>request_suspend_state: wakeup (0->0) at 6055342947438 (1970-01-01 01:40:55.333259500 UTC) [ 6055.354675] request_suspend_state: wakeup (0->0) at 6055342947438 (1970- 01-01 01:40:55.333259500 UTC) <3>init: untracked pid 11530 exited [ 6055.355063] init: untracked pid 11530 exited <3>init: untracked pid 11531 exited [ 6055.355071] init: untracked pid 11531 exited I am mainly worried because of the amount of time that has elapsed already. Ali Saidi <saidi <at> umich.edu> writes: > > It will take around 1.5 hours for android to boot completely and that number is probably closer to 4 or 5 hours if you're running the debug binary which you appear to being doing. > Ali > > > > On Oct 13, 2012, at 3:40 AM, manish jain wrote: > Hi,While running Android GingerBread simulation, my simulation is not able to proceed after a particular point. I am using M5 terminal for seeing the output. The following messages are appearing on the M5 terminal: VFS: Mounted root (ext2 filesystem) on device 8:1.[ 2.254015] VFS: Mounted root (ext2 filesystem) on device 8:1.<6>Freeing init memory: 148K[ 2.254029] Freeing init memory: 148K<3>init: cannot open '/initlogo.rle' > [ 2.268521] init: cannot open '/initlogo.rle'<3>init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'[ 2.277404] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' > sh: can't access tty; job control turned offAnd below is the output on termianl from where I gave command to boot Android Image:manish <at> ubuntu:~/gem5-stable/system/disks$ build/ARM/m5.debug configs/example/fs.py -b bbench-gb --kernel=vmlinux.smp.mouse.arm --frame-capture > bash: build/ARM/m5.debug: No such file or directorymanish <at> ubuntu:~/gem5-stable/system/disks$ cd ../..manish <at> ubuntu:~/gem5- stable$ build/ARM/m5.debug configs/example/fs.py -b bbench-gb -- kernel=vmlinux.smp.mouse.arm --frame-capture > gem5 Simulator System. http://gem5.orggem5 is copyrighted software; use the --copyright option for details.gem5 compiled Oct 9 2012 02:28:51gem5 started Oct 13 2012 02:46:36 > gem5 executing on ubuntucommand line: build/ARM/m5.debug configs/example/fs.py -b bbench-gb --kernel=vmlinux.smp.mouse.arm --frame- captureGlobal frequency set at 1000000000000 ticks per secondinfo: kernel located at: /home/manish/gem5-stable/system/binaries/vmlinux.smp.mouse.arm > Listening for system connection on port 5900Listening for system connection on port 34560: system.remote_gdb.listener: listening for remote gdb #0 on port 7000info: Using bootloader at address 0x80000000**** REAL SIMULATION **** > info: Entering event queue <at> 0. Starting simulation...warn: The clidr register always reports 0 caches.warn: clidr LoUIS field of 0b001 to match current ARM implementations.warn: The csselr register isn't implemented. > 305035000: system.terminal: attach terminal 0warn: instruction 'mcr bpiallis' unimplementedwarn: instruction 'mcr icialluis' unimplementedwarn: The ccsidr register isn't implemented and always reads as 0. > warn: instruction 'mcr dccimvac' unimplementedwarn: instruction 'mcr dccmvau' unimplementedwarn: instruction 'mcr icimvau' unimplementedwarn: instruction 'mcr bpiallis' unimplemented > warn: LCD dual screen mode not supportedwarn: instruction 'mcr bpiallis' unimplementedwarn: instruction 'mcr icialluis' unimplementedwarn: instruction 'mcr bpiallis' unimplementedDoes anybody has some idea about itor someone has experienced it before?ThanksManish > _______________________________________________gem5-users mailing listgem5-users <at> gem5.orghttp://m5sim.org/cgi-bin/mailman/listinfo/gem5- users > > > > > > _______________________________________________ > gem5-users mailing list > gem5-users <at> gem5.org > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users _______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
